Support Center > Knowledge base> Article: 220VAC Power Connections: Core End Type and Photo

220VAC Power Connections: Core End Type and Photo

Article ID: 17220 Email Print
Question
I'm wiring my business for the laser and am running 220V. What cord end will I be receiving with my machine?

Answer

Systems: All

Epilog's laser systems use auto-switching power supplies accommodating 110 to 240 volts at 50-60Hz. We recommend a dedicated 15A breaker regardless of voltage. If you are going to be running your laser on a 220V and are located in the United States, you will receive a cord with a NEMA L6-15R receptacle (Hubble HBL4570C equivalent). This cord end can also be acquired from a local electrical house or a local hardware store in some cases. A picture has been provided below of both the male and the female sides of this connection.

All international shipments that require a 220V connection will receive a cord with no receptacle on the end so you can dictate which receptacle to use based on local standards.


related articles

Article Details
9840 Created on: Apr 25, 2012
Date updated: Apr 26, 2012
Tagged: 220v, plug


Poor Outstanding