Support Center > Knowledge base> Article: Bar Code Engraving Suggestions

Bar Code Engraving Suggestions

Article ID: 75270 Email Print
Question
How can I engrave a very small bar code with the laser?

Answer

There are a lot of variables which determines whether your 2D barcode engraving will be successful. The contrast you can achieve on the PCB, the amount of data contained within the 2D barcode, size of barcode and most importantly, the scanner you’re using. When you're trying to engrave a very small barcode, here are some things to keep in mind:  

  • A 2D barcode consists of individual cells (squares) so the uniformity of these individual cells are important when it comes to scanning. We'd recommend trying to engrave the bar code at both 600DPI and 1200DPI.

  • The contrast you get when laser etching a PCB using a C02 laser is various shades of gray. When engraving on a PCB, pick a medium speed setting, start with low power and slowly adjust the power up in 3-5% increments until you get the best contrast. Do this test at both 600 and 1200DPI.

  • Once you’ve determined the best print settings for contrast, start with a larger barcode (7mm) and work your way down 1mm at a time.

 The above will help optimize the print settings and provide the threshold of barcode size which can be scanned. The last variable is the scanner being used. You’ll want to try a few different scanners from your basic free mobile app to a $300 off the shelf unit, to a high end unit that allows for light and resolution adjustment. The bar code reader is a big factor in your success when engraving a very small barcode.


related articles

Article Details
1461 Created on: May 11, 2016
Date updated: May 11, 2016
Tagged: Barcode, bar code


Poor Outstanding