Support Center > Knowledge base> Tagged: print driver
Tag: print driver
4 Articles
Orange arrow How can I change the default settings in the print driver?

  To change the default settings in the print driver, follow the instructions below: 1. Click 'Start', 'Control Panel', 'Devices and Printers' in Windows 7-->2. Right-Click on the Epilog Engraver Driver Icon and select 'Printer Preferences'-->3. Select the desired default parameters in Epilog Eng...
Orange arrow I have an Epilog Legend 24EX and was using a windows XP laptop to operate it. However, the laptop has taken an unfortunate turn for the worse and my replacement is a Windows 7 64bit laptop. How can

  -->-->Epilog only has 64 bit drivers for the Epilog Zing, Mini, Helix, EXT, FiberMark and Fusion lasers. Unfortunately we have no plans to release 64bit drivers for our previous model machines and thus, you must either continue using a 32bit system to run your machine or use a Virtual Machine on Wi...
Orange arrow How do I completely uninstall a print driver from my computer?

  Go to Devices and Printers. Right click on the driver you wish to remove and select Remove Device. Make sure that was the only driver of its kind. If there is more than one, remove the others, too. Reboot computer. This is an important step. After you reboot, go...
Tagged: print driver

Orange arrow How do I install a driver using a crossover cable on Windows 8?

  *Please follow these instructions after you have changed your TCP/IP settings on your computer and after you disable the Driver Enforcement Signature. Press your Windows Button and "X" together to pull up your Power User Menu. Select "Control Panel". Under Hardware and Sound, select Devices ...

Page: 1 of 1