Support Center > Knowledge base> Tagged: lens
Tag: lens
6 Articles
Orange arrow How do I clean the lenses in my laser system?

43693 views
  Cleaning the Optics in your Epilog Laser System Ensuring your optics are clean will help your laser system perform its best. If smoke, resin, or other contaminants are allowed to accumulate too heavily, they will reduce the available laser power and may cause damage. Dirty optics can also greatly ...
Orange arrow How do I remove my lens carriage on the Epilog Zing?

15925 views
  Lens Carriage Removal and Installation on the Epilog Zing Laser Machine Type: Zing Engraver Tools Required: Phillips screw driver Disconnect the machine from its power source. Remove the power cord from the machine. Move the X-Axis assembly to the center of the machine. M...
Posted in: Epilog Zing
Tagged: optics, lens, lenses, zing


Orange arrow How does the focus lens work on the laser?

26569 views
  This Technical Library article discusses the purpose of the focus lens as well as guidelines for using lenses of different sizes for various projects. What does a focus lens do? A laser beam emanating from the laser tube is typically around one-quarter of an inch (240 thousandths) in diameter. Th...
Orange arrow Where can I buy the Epilog lens cleaner?

15184 views
  Lens Cleaner - How to Purchase More You can purchase it directly from Epilog Technical Support. Dial +1 303.215.9171, press #1 for parts. The part number for the lens cleaner is MCP-303....
Orange arrow How do I replace the lens assembly on the 36EXT?

15801 views
  Replacing the Epilog Legend 36EXT Lens Assembly Although the standard 2" focal lens that comes with the EXT will work well for most projects, to achieve the optimum laser beam on special types of projects, we offer two optional focus lenses. The optional lenses on the Legend 36EXT are designed not...
Posted in: Replacing Optics

Orange arrow How do I replace the lens carriage roller on my Epilog Zing?

11133 views
  Zing Engraver Lens Carriage Roller Replacement Machine Type: Epilog Zing LaserTools Required: Phillips screwdriver Disconnect the machine from its power source. Remove the power cord from the machine. Move the X-Axis assembly to the center of the machine. Move the lens carriage to the cen...
Posted in: Epilog Zing
Tagged: lens, zing, roller



Page: 1 of 1