Support Center > Knowledge base> Tagged: belt
Tag: belt
3 Articles
Orange arrow How do I replace the Z-Belt in my Mini?

7910 views
  Z-Axis Belt Replacement in the Epilog Mini Machine Types: Epilog Mini 18/24 Tools Needed: Philips head screw driver 5/16 Nut Driver 3/32 Hex Wrench Wire Cutters Sharpie Marker Intro: This procedure details steps to replacing the Z-belt. The Z-belt controls the vertical moveme...
Posted in: Epilog Mini
Tagged: mini, belt, z-belt


Orange arrow How do I replace my Y-Belt on my Mini, Helix or FiberMark?

12890 views
  Y-Axis Belt Replacement on the Epilog Mini/Helix/FiberMark Machine Type: Epilog Mini 18/24, Helix and FiberMark Tools Needed: Philips head screw driver 5/16 Nut Driver This procedure details steps to replacing the Y-belts. The Y-belt controls the mo...
Orange arrow How do I replace the x-axis belt on my Mini?

16539 views
  X-Axis Belt Replacement on the Mini Machine Type: Epilog Mini 18/24 Tools Needed: #1 and #2 Screwdriver Stapler Turn off the machine and unplug the power cord. Remove the left side panel from the engraver by removing the six screws that fix it to the body of the Mini or Helix. T...
Posted in: Epilog Mini
Tagged: replace, x-axis, mini, belt



Page: 1 of 1