Support Center > Knowledge base> Tagged: auto focus
Tag: auto focus
4 Articles
Orange arrow How do I troubleshoot a problem with my auto focus assembly on my laser?

9811 views
  Checking the Auto Focus Plunger Assembly This guide will walk you through troubleshooting common problems when dealing with the Auto Focus feature. The Auto Focus Plunger is a tool the machine uses to focus the laser automatically.Below are troubleshooting and maintenance guidelines that will hel...
Posted in: Troubleshooting
Tagged: auto focus


Orange arrow How do I keep the laser head from moving out from home position when I hit the Focus button?

4502 views
  Click here to see a video of how to use the Stop/Focus feature to keep the laser head from moving....
Tagged: auto focus


Orange arrow How do I replace the Auto Focus Plunger on my Mini or Helix?

15650 views
  Auto Focus Plunger Replacement on the Mini/Helix Machine Type: Epilog Mini 18/24, Helix Tools Needed: Small screw driver 5/64 Allen wrench Intro: This procedure details steps to replacing the auto focus plunger on the Legend Mini and Helix machines. Before starting on this proce...
Orange arrow How do I set manual and auto focus on my Epilog Mini or Helix?

14089 views
  Setting Manual Focus & Auto Focus Machine Types: Epilog Mini 18/24 and Helix Tools Needed: #1 Phillips Head Screwdriver Piece of Anodize Aluminum Get out a 4x4 piece of anodized aluminum and place it inside the machine, flushed with the ruler guide. Now turn on the engraver. ...

Page: 1 of 1