Skip to main content
Tech Support: (+1) 303-215-9171
|
Sales: (+1) 303-277-1188
| made in usa

Power Requirements by Laser Wattage

What are the power requirements for my Epilog based on laser wattage.

Power requirements for the Epilog engraver based on laser wattage.

Systems: All

This information is to be used only to size a power condition or an UPS (uninterruptible power supply)and should not be used to size the circuit providing voltage to the system. The circuit requirement remains as a 15 amp circuit.

Laser Type Wattage Voltage Requirements Wattage of Power Supplies
CO2 30 110-220 VAC 600
CO2 35 110-220 VAC 600
CO2 40 110-220 VAC 600
CO2 45 110-220 VAC 600
CO2 50 110-220 VAC 1200
CO2 60 110-220 VAC 1200
CO2 75 110-220 VAC 1200
CO2 100 220 VAC 2500
CO2 120 220 VAC 2500
Fiber 10 110-220 VAC 900
Fiber 20 110-220 VAC 900
Fiber 30 110-220 VAC 900
Fiber 50 110-220 VAC 900

If further assistance is required, please contact Epilog Laser Technical Support by phone at 303-215-9171, or by email at tech@epiloglaser.com.