Skip to main content
Tech Support: (+1) 303-215-9171
|
Sales: (+1) 303-277-1188
| made in usa

PhotoLaser Plus Quick Start

How do I use PhotoLaser Plus with my Laser?

How to use PhotoLaser Plus with the Epilog engraver.

This page is to provide you with special settings that we've developed with CADLink for PhotoLaser Plus, as well as to provide you with some quick tips that we think you'll find helpful when using the software.

 

Download and unzip the attached material profile settings into your C:\PhotoLaser Plus Epilog Edition 9.0\PhotoLaser. They include our 600 dpi wood setting, a setting for small photos engraved on wood, acrylic with invert and flip included, anodized aluminum, engravable plastic, leather, a marble/stone setting that automatically inverts the photo.


A short pdf document demonstrating how to use PhotoLaser Plus, and software tips is attached to this article.

 

MaterialRes.PhotoLaser Plus Material Setting30 watt40 watt50 watt60 watt75 watt

120 watt

Marble300 dpimarble_invert.plp100s
70p
100s
60p
100s
50p
100s
40p
100s
30p
100s
15p
Wood (Maple)600 dpiWood Setting 600 DPI Epilog.plp30s
100p
40s
100p
50s
100p
60s
100p
70s
100p
100s
100p
Wood - Small Photo600 dpiWood Setting 600 DPI Small Image.plp35s
100p
45s
100p
55s
100p

65s
100p

75s
100p
100s
100p
Black Anodized 300 DPI300 dpiBlack Anodized Invert 300 DPI Epilog100s
35p
100s
30p
100s
25p

100s
20p

100s
15p
100s
10p
Black Anodized 600 DPI600 dpiBlack Anodized Invert 600 DPI Epilog100s
30p
100s
25p
100s
20p
100s
15p
100s
10p
100s
5p
Acrylic300 dpiacrylic_invert_flip.plp100s
60p
100s
55p
100s
50p
100s
45p
100s
40p
100s
30p

 

Frequently Asked Questions:

Q: Is this a replacement for CorelDRAW or other graphic layout software?

A: No, this is photo processing software that should be used for photos. Use Corel or another software package for more complicated graphic layouts after the photo is processed through this software.

Q: Why isn't my photo engraved into wood coming out as well as Epilog's?

A: Are you using the wood setting developed by Epilog? We use this for 100% of our wood photography and it provides exceptional results when engraving into wood. Download the settings above!

Q: I'm using Epilog's wood setting, but I'm seeing an obvious dot pattern when I engrave the photo.

A: You aren't running a photo resized to 600 dpi. Before processing the photo with the Epilog Wood Setting, go to Image/Image Size and change the photo size to 600 dpi, then hit apply.

If further assistance is required, please contact Epilog Laser Technical Support by phone at 303-215-9171, or by email at tech@epiloglaser.com.