Full Guide: Removing the X-Axis Rail and Belt
Estimated time: 30–45 minutes • Skill: Intermediate To replace the X-Axis belt on an Epilog FiberMark laser, you must remove...
Restore Accuracy: Replacing the X-Axis Encoder Strip
Estimated time: 20–30 minutes • Skill: Basic This guide explains how to replace the encoder strip and reader assembly on...
X-Axis Assembly Install – FiberMark
Estimated time: 30–45 minutes • Skill: Intermediate This guide explains how to remove and reinstall the X-Axis assembly on the...
X-Axis Belt Replacement – Mini / Helix
Estimated time: 15–20 minutes • Skill: Basic This guide walks you step-by-step through replacing the X-Axis belt on an Epilog...
X-Axis Flex Cable Install – Mini / Helix
Machine Types: Epilog Mini 18/24 Tools Needed: Phillips #1 Screwdriver Turn off machine and unplug power cord. Open glass lid...
X-Axis Linear Guide Install
Machine Types: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver 3/32 Allen wrench Torx Screw Driver with 3/32...
X-Axis Motor Install – FiberMark
Estimated time: 15–20 minutes • Skill: Basic This guide explains how to replace the X-motor on the Epilog FiberMark laser...
X-Axis Rail Install
Machine Type: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver Small Philips head screw driver Flat head screw...