Adjusting the X-Axis Belt Tracking
Estimated time: 30-45 minutes • Skill: Advanced This procedure outlines the proper method for adjusting belt tracking on the belt...
Air Assist Tubing Replacement – Fusion Maker, Edge, Pro 24 & 36
The Air Assist (AA) Tubing in your engraver plays a crucial role in ensuring optimal performance by directing a stream...
Fusion Maker, Edge, Pro 24 & 36 – Linear Guide (Rev 1 IKO) Replacement
This document provides concise, step‑by‑step instructions for removing and installing the X‑Axis linear guide (IKO rail) on Fusion Edge, Maker,...
How to Install the Strain Relief Kit
Estimated time: 10–15 minutes • Skill: Basic This guide explains how to install the strain relief kit on the lens...
Linear Guide Replacement (IKO) – Large Aperture Fusion Pro
Removal Procedure Power OFF the machine and disconnect the power cord. Remove the right and left side panels. Open the...
X-Axis Assembly Replacement – Fusion Maker, Edge, Pro 24 & 36
This document outlines the replacement of the x-axis assembly in the Fusion Maker, Edge, and Pro 24 and 36....
X-Axis Belt Replacement – Fusion Edge and Pro
This document outlines the replacement of the x-axis belt in the Fusion Edge, and Pro....
X-Axis Belt Tensioning Guide
Identifying X-Axis Rail Version Before you begin, determine which version of the X-Axis rail is installed in your machine. Check...
X-Axis Idler Replacement – Fusion Maker, Edge, Pro 24 & 36
This document outlines the replacement of the x-axis idler in the Fusion Maker, Edge, and Pro 24 and 36....
X-Axis Reducer Belt Replacement – Fusion Edge, Pro 24 & 36
The X-Axis Reducer Belt is a crucial component in ensuring the smooth and precise movement of the engraving machine. Over...
X-Axis Reducer Drive Replacement – Fusion Edge, Pro 24 & 36
This document outlines the replacement of the x-axis reducer in the Fusion Edge and Pro 24 and 36....
X-Motor Replacement
Remove Side Panel Before we begin, make sure you turn off & unplug the machine. Using a 5/32” Allen wrench,...