Adjusting the Home and Park Positions
This document outlines the home and park position adjustment procedures for the Fusion Maker, Fusion Edge, and Fusion Pro.
Autofocus Calibration Wizard
As of firmware version 1.0.2.1, a new Autofocus Calibration Wizard is available to streamline your focusing setup. To use this...
Camera Calibration – Fusion Maker, Edge, and Pro 24 / 36
The camera calibration ensures that the IRIS camera system offers optimum accuracy when displaying artwork on material and when completing...
Fiber Alignment – Fusion Pro 32 & 48
This guide provides step-by-step instructions for performing precise laser alignment on the Fusion Pro CO2 and Fiber laser systems. Proper...
Focus Calibrations – Fusion Maker, Edge, and Pro
Please find the attachment for an in-depth description.
Focus Calibration Wizard
Focus Calibration Wizard Click the Gear icon in the upper-right corner. Select Focus. Select the lens aperture. Note: If you...
Laser Alignment – Maker / Edge / Pro
Turn On To begin the laser alignment procedure, power on the laser. For the following procedures, the table will be...
Leveling the Table
This document outlines the table leveling procedure for the Fusion Maker, Edge, and Pro 24 and 36. Table level should...
Manual Focus Gauge Calibration – Fusion Maker, Edge, Pro
This procedure outlines the steps required to calibrate the manual focus gauge after completing the Focus Calibration Wizard. Proper calibration...
Quick Guide: Calibrating the Joystick for Accurate Movement
Steps to Calibrate the Joystick Open the Settings Menu On the display panel, press the gear icon in the top-right...
When to Calibrate the IRIS Camera System
Applies to: Fusion Maker • Fusion Edge • Fusion Pro • G100 All Fusion Maker, Edge, Pro, and G100 engravers...