Service and Repair

This document outlines the replacement of the backplane board in the Fusion Pro 32 and 48.

Backplane Board Replacement – Fusion Pro 32 & 48

How do I replace the backplane board in the Fusion Pro 32 and 48?

The control module is a crucial component of your Fusion Maker, Fusion Edge, or Fusion Pro engraver, enabling seamless operation and precise control. This guide provides step-by-step instructions for safely removing and installing a new control module to ensure optimal performance. Following these procedures will help you maintain your engraver’s (...)

Control Module Replacement – Fusion Edge, Maker, Pro

04/04/2025

This document provides a step-by-step guide on how to replace the control board in your laser system. Replacing the control board is a crucial process that ensures your laser operates efficiently and reliably. Follow these instructions carefully to safely remove the old control board and install the new one, getting (...)

Control Module Replacement – Fusion Pro 32 & 48

How do I replace the control module in the Fusion Pro 32 and 48?

10/03/2024

Flashing SD Cards

Learn how to flash an SD card for Epilog Laser systems using Balena Etcher.

This guide outlines the steps for flashing an SD card for your laser system. A technician must provide the required disc image file to complete this process. Do not proceed without first obtaining the correct file specific to your machine. Flashing SD Cards SD Card Removal Remove the control board (...)

06/10/2025

Applies to: Fusion Pro 32 • Fusion Pro 48 This guide provides step-by-step instructions for upgrading the floating backplane board in Fusion Pro 32 and 48 engravers. Designed for models manufactured before mid-2020, this procedure ensures proper installation and configuration of the new backplane board. By following these instructions, you (...)

Floating Backplane Upgrade

How do I install the floating backplane in the Fusion Pro 32 and 48?

This guide will walk you through the process of removing, installing, and programming the X-Axis Drive Board for Fusion Edge and Pro 24 / 36 models. Proper precautions, including the use of an anti-static strap, are essential to ensure the safe handling of electronic components. Drive Board Replacement Procedure Models: (...)

How to Replace the X-Axis Motor Driver: Step-by-Step Guide

Learn how to replace the TE0104 X-Axis Drive Board on 17000 Edge and Pro machines. This fix can potentially resolve various X-Axis motion issues and help restore smooth operation.

04/16/2025

This procedure outlines how to replace both the Carriage Camera PCB and the X-Axis USB-C cable on a 16000 Series Fusion Pro laser system. The Carriage Camera PCB also integrates the Auto Focus sensor, which is critical to system performance. Follow each step carefully to ensure proper installation and avoid (...)

Lens Camera Board and USB-C Cable Replacement – Fusion Pro 32 & 48

How do I replace the lens camera board in the Fusion Pro 32 and 48?

Replacing the Control Panel Before we begin, turn off and unplug the Fusion Pro. Using a 5/32” Allen Key, remove the right side panel from the machine. Open the display panel package you received and put on the anti-static strap. Clip the strap onto any metal part of the machine. (...)

Replacing the Control Panel

Replace the display panel on the Fusion Pro 32 or 48.

This guide provides step-by-step instructions for replacing the SD card and coin battery on Fusion Maker, Edge, and Pro systems. Be sure to follow anti-static precautions and use the required tools for each step. SD Card Replacement (Fusion Maker & Edge) Control Module / SD Card Removal Turn off the (...)

SD Card and Coin Battery Replacement – Fusion Maker, Edge, Pro 24 & 36

How do I replace the SD card and coin battery in the Fusion Maker, Edge, and Pro 24 and 36?

This guide provides instructions for replacing the SD card and coin battery in the control module of Fusion Pro 32 and 48 systems. Always follow proper anti-static precautions and use the correct tools and parts. Control Module Removal Turn off the engraver. Disconnect the engraver from the power source. Disconnect (...)

SD Card and Coin Battery Replacement – Fusion Pro 32 & 48

How do I replace the SD card or coin battery in the Fusion Pro 32 and 48?

This document outlines the replacement of the x-axis PCB in the Fusion Maker, Edge, and Pro 24 and 36.

X-Axis PCB Replacement

How do I replace the x-axis PCB in the Fusion Maker, Edge, and Pro 24 and 36?