CO2 Laser Replacement Checklist / Low Output
Having to continually reduce speed and increase power can indicate low output from the laser. This document will help identify...
CO2 Laser Replacement Checklist / No Output
These items should be checked before replacing a CO2 laser tube with no output. If the laser has been inactive...
CO2 Laser Tickle Settings
Introduced in the Epilog Mini and Helix engravers, laser tickle settings allow the user to customize certain CO2 laser characteristics...
Extended Cold Start Guide
Lasers that have been inactive for a period of time may not fire right away. There are settings in the...
Fiber Laser Replacement
This document outlines the replacement of the fiber laser in the Fusion Maker, Edge, and Pro 24 and 36. After...
Fiber Laser Replacement – Fusion Pro 32 & 48
This document outlines the replacement of the fiber laser in the Fusion Pro 32 and 48....
Front Door Interlock Replacement – Fusion Pro 32 & 48
Please find the attachment for an in-depth description....
How to Replace the CO₂ Laser Tube & RF Unit
Estimated time: 60–90 minutes • Skill: Intermediate This guide outlines the procedure for replacing CO₂ and 120-Watt laser tubes, as...
JPT 50 Watt Fiber Laser Conversion – Fusion Pro 48
This document outlines the installation of the JPT 50-watt fiber laser conversion kit in the Fusion Pro 48....
Purchase or Print a New Laser Alignment Target
Accurate laser alignment is essential to achieving clean, precise engraving and cutting results. Over time, alignment targets can wear out...
Replacing the Laser Tube
Remove Panels Shut off the laser and remove the power cord from the machine. For this procedure you will need...