Encoder Strip Install – FiberMark
Please find the attachment for an in-depth description.
X-Axis Assembly Install – FiberMark
Please find the attachment for an in-depth description.
X-Axis Assembly Replacement
Remove Side Panels Shut off the laser and remove the power cord from the machine. Remove the left side panel by loosening the four screws on its main face, as well as the two screws on the back. Remove the right side panel by loosening the four screws on its (...)
X-Axis Belt Replacement – Mini / Helix
This guide walks you step-by-step through the process of replacing the X-axis belt on an Epilog Mini or Helix laser engraver. Please follow each instruction carefully to ensure proper installation and avoid damaging your machine. Before beginning, make sure the engraver is powered off and unplugged to ensure your safety. (...)
X-Axis Encoder Strip Install
Maintaining the precision of your Epilog Mini 18/24 or Helix laser engraver requires periodic replacement of key components, such as the optical encoder strip within the X-axis I-beam. This critical part ensures accurate movement of the laser head, and replacing it is a manageable task with the right tools and (...)
X-Axis Flex Cable Install – Mini / Helix
Machine Types: Epilog Mini 18/24 Tools Needed: Phillips #1 Screwdriver Turn off machine and unplug power cord. Open glass lid and locate the I-beam. Picture 1 Remove I-Beam cover by loosening the two screws on the front side of the beam and the four screws on the rear if you (...)
X-Axis Linear Guide Install
Machine Types: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver 3/32 Allen wrench Torx Screw Driver with 3/32 hex bit This procedure details steps to replacing the X-axis bearing set. The bearing set is the race and bearing bracket that guides the X-Axis carriage assembly from left to (...)
X-Axis Rail Install
Machine Type: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver Small Philips head screw driver Flat head screw driver 3/32 Allen wrench Torx Screw Driver with 3/32 hex bit Intro: This procedure details steps to replacing the X-Axis rail on the Legend Mini. The X-Axis rail guides the (...)
X-Motor Replacement
Remove Side Panels Shut off the laser and remove the power cord from the machine. Remove the left side panel by loosening the four screws on its main face, as well as the two screws on the back. Remove the right side panel by loosening the four screws on its (...)