The Configuration menu has three sub-menus: System, Network, and About Machine.
System
Once selected, the System Settings display detailed information about the machine. These are factory settings that should not be changed unless instructed by Epilog Technical Support.
Netzwerk
Once selected, the Network Settings allow you to change the IP Address and the Netmask. The IP Address on this screen should match the IP Address you have assigned your machine in the Job Manager. If you have multiple machines, each one will need its own IP Address.
About Machine
Once selected, this section displays info about your laser’s firmware version, laser power, and Serial Number.
Park Axis
Pressing Park Axis returns the Laser to the Home Position.
