Service- und Reparaturarchiv

Ersatz der X-Achsen-Baugruppe – Legend

Wie ersetze ich die X-Achsen-Schiene in meinem Legend EXT?

This procedure provides detailed, step-by-step instructions for removing and reinstalling the X-Axis I-Beam on the Legend 36EXT laser system. Proper handling and alignment of the I-Beam are essential to ensure accurate motion and optimal performance of the machine. Please follow all safety guidelines and use the recommended tools to perform (...)

04/11/2025

Ersatz für Linearführung (IKO) – Legend

Wie ersetze ich die Linearführung in meinem Legend ?

This document outlines the step-by-step procedure for replacing the X-Axis linear rail assembly (bearing set) on the Epilog Legend EXT laser system. The linear rail is responsible for guiding the X-Axis carriage assembly smoothly and accurately across the engraving area. Over time, wear or damage to the rail can affect (...)

04/11/2025

Ersatz des Motors für den Lüfter der X-Achse – Legend

Wie ersetze ich den Lüfter des X-Achsen-Motors in meinem Legend ?

This document provides detailed instructions for installing the X-motor fan on the Epilog Legend EXT laser system. Proper cooling is essential for reliable motor performance, and this procedure ensures the fan is securely mounted and correctly connected. Before beginning, make sure the engraver is powered off and disconnected from its (...)

04/11/2025

Ersatz des X-Achsen-Motors – Legend

Dieses Dokument beschreibt die Installation des X-Achsen-Motors an einem Legend .

This document provides step-by-step instructions for replacing the X-axis motor in the Epilog Legend 36EXT laser system. The X motor plays a critical role in ensuring accurate movement of the laser carriage, and proper installation is essential for maintaining optimal engraving performance. Before beginning this procedure, ensure the machine is (...)

04/11/2025

Ersatz für Autofokus-Stößel – Legend

Dieses Dokument enthält detaillierte Anweisungen zum Austausch des Autofokus-Sensors in einem legend EXT.

This document outlines the step-by-step procedure for replacing the Auto Focus sensor on the Epilog Legend EXT laser system. Before beginning, make sure the machine is powered off to ensure safety during the process. Familiarity with the X-carriage assembly is recommended; refer to the exploded view diagram for part identification (...)

04/11/2025

Installation des flexiblen Kabels der X-Achse – 36EXT

Wie installiere ich das X-Axis-Flexkabel an meinem 36EXT?

The X-axis flex cable plays a crucial role in the operation of the Epilog Legend 36EXT engraver. Over time, the cable may wear out or become damaged, requiring replacement. This guide provides step-by-step instructions to safely replace the X-axis flex cable, ensuring that your engraver continues to perform at its (...)

04/08/2025

Einbau des X-Achsen-Riemens – 36EXT

Wie ersetze ich den Riemen der X-Achse an meinem 36EXT?

This procedure details steps to replace the belt that carries the laser head. These belts may get worn out and must be replaced for optimal performance from your machine. Always ensure proper safety precautions are taken when servicing hardware components. Procedure Steps Step 1 Remove side panels Remove both side (...)

08/21/2026

Encoder-Streifen installieren

Wie installiere ich den Encoder-Streifen in meinem 36EXT?

Das beigefügte Dokument führt Sie durch den Austausch des Encoderstreifens an einem 36EXT.

09/24/2024

X-Achse

Filter

Filter

Ersatz der X-Achsen-Baugruppe – Legend

Ersatz für Linearführung (IKO) – Legend

Ersatz des Motors für den Lüfter der X-Achse – Legend

Ersatz des X-Achsen-Motors – Legend

Ersatz für Autofokus-Stößel – Legend

Installation des flexiblen Kabels der X-Achse – 36EXT

Einbau des X-Achsen-Riemens – 36EXT

Encoder-Streifen installieren