Thank you for purchasing an Epilog Fusion Ascent Laser system. Your Epilog system has been designed to be easy to operate, but you will utilize it to its fullest potential by taking some time to read this owner’s manual prior to use. You will be ready to use the Epilog Laser system as soon as you read the first few sections. Then you can refer to topics in the remaining sections as you work.
Icons Used in this Manual
Look for these symbols to help you find valuable information throughout the text:
General Description
The Epilog Ascent Model 19000 laser system uses a flying optic (plotter) beam delivery mechanism to deliver a laser beam to the material being processed on the work surface of the machine. The flying optic beam delivery system moves the laser beam across the work surface and fires the laser when instructed to do so, vaporizing the material being processed. The Ascent emulates a paper printer in that it receives data from a graphics software program, interprets that data, and then instructs the machine where to move the flying optics and where to fire the laser.
Regional configurations This manual covers all Fusion Ascent configurations. Machines supplied in the European Union and EEA run a firmware build in which the wireless network interface is disabled. There is no operator-accessible means of enabling it, and these machines do not transmit. They connect to a computer by Ethernet or USB. Sections of this manual describing wireless setup, wireless connection or wireless settings apply only to machines supplied outside the EU and EEA. Those sections are marked.
Model Identification
The product family described in this manual is commercially identified as Fusion Ascent 12, Fusion Ascent 24, and Fusion Ascent 36. For regulatory, certification, and technical file purposes, these products are designated as Model 19000. References to Fusion Ascent products throughout this manual correspond to the Model 19000 designation shown on the equipment nameplate.
Intended Use
The Epilog Ascent laser system, Model 19000 is intended for use to engrave, cut and mark a wide variety of materials including, but not limited to, wood, plastic, acrylic, glass, leather, rubber, coated metals, anodized aluminum, textiles, paper, etc.
Possible Misuse
The Epilog Ascent laser system is not designed to process PVC or other materials that produce noxious byproducts when engraved, cut, or marked. The warranty is voided if PVC is processed.
Operation of the Ascent Laser System
The Epilog Ascent is only to be used by trained and qualified personnel. Personnel that have not been trained in the operation of the computer, graphics software program, or the laser system must enlist the help of a qualified operator to operate the laser system.
Ascent Workstation
The Epilog Ascent is comprised of the Ascent laser system, an air assist pump, a computer with graphics software, and an exhaust system.