1. Start by using scissors or a utility knife to cut the box straps. Stand clear of the straps, as they are under high tension and may pop out at high speed when cut.
Ahora retire el flejado y la tapa de madera de la caja.
2. Pull the box up and away from the pallet.
- Corta la cinta que mantiene la bolsa cerrada y luego extiende la bolsa sobre los laterales de la máquina.
- If you purchased a stand with your machine and you’d like to use it as the base for your Fusion Ascent machine, assemble the stand now, before continuing on with this lesson.
- The Fusion Ascent weight ranges from 147-212 lbs. With the help of an additional person, lift your Ascent laser system from the pallet and place it on a sturdy, level surface.
- Once you’ve removed the machine from the pallet, remove the plastic bag.
-
You’ll find the included items and materials stored underneath:
- Cable de alimentación
- Cable Ethernet
- Cable USB
- Instalación de software USB
- Guía de inicio rápido
- Manual del propietario
- Tarjeta de inscripción y kit de la suite de entrenamiento
- Kit de muestras de materiales del proveedor
- Limpiador de lentes
- Diana de Laser Beam
- Hoja de calibración de la cámara
