Archivos de uso y funcionamiento

Air Assist: conversión de aire comprimido de taller (configuración predeterminada)

Descubre cómo configurar y adaptar el solenoide de asistencia de aire de tu láser a diferentes tipos de compresores para garantizar un flujo de aire seguro y eficiente.

Understanding the Air Assist Solenoid The Ascent laser’s air assist solenoid manages airflow differently depending on your compressor setup. It is critical to configure the internal tubing correctly to prevent equipment damage or excessive compressor wear. Default Configuration (Constant-Run Pumps): Small diaphragm pumps lack a pressure shut-off switch and must (...)

04/22/2026

Envío de trabajos vectoriales desde Adobe Illustrator

When working with Adobe Illustrator, frequent updates can sometimes alter default settings or introduce changes that interfere with how vector paths are interpreted. This guide walks through the key settings that affect vector recognition. Setting Line Weight, Stroke, or Thickness The Epilog Dashboard separates raster and vector processes by the (...)

03/30/2026

Guía interactiva de conexión

This guide walks you through configuring your network settings, establishing a connection, and installing the control software for your Epilog Laser system. Please select your machine type below to get started. Connection Setup Step 1: Select Your Laser System Which Epilog Laser model are you configuring? Legacy Systems Older generation (...)

04/15/2026

Control de filtros: guía de conexión

Diagramas de cableado y pinouts para conectar sistemas de filtración externos a su Epilog.

Epilog Fusion Maker, Edge, Pro, and Galvo laser systems include a DB9 port on the right side of the control panel for managing external filtration systems. These signals are automatically assigned based on the selected filter type in the Epilog control panel. Currently, Epilog officially supports two filtration systems: Filtrabox (...)

03/16/2026

Instalación silenciosa de Epilog Software Suite

As of version 2.2.16.2, the Epilog Software Suite installer includes support for silent installation, with some important caveats: Silent installation is supported, but this may not operate correctly in a headless mode. During installation, Windows may still prompt the user to confirm whether they trust Epilog as a driver publisher. (...)

03/16/2026

Actualización de los periféricos

¿Cómo actualizo los periféricos en Fusion Maker, Edge, Pro y Galvo?

Peripheral updates ensure optimal performance and communication between the engraver’s programmable components by installing the latest firmware and configuration files. Programming the Peripherals On the display panel, tap the gear icon in the upper-right corner to open the Settings menu: Figure 1: Access the Settings menu by tapping the gear (...)

03/31/2026

Requisitos del sistema y configuración

Filtros

Filtros

Air Assist: conversión de aire comprimido de taller (configuración predeterminada)

Envío de trabajos vectoriales desde Adobe Illustrator

Guía interactiva de conexión

Control de filtros: guía de conexión

Instalación silenciosa de Epilog Software Suite

Actualización de los periféricos