Archivos de uso y funcionamiento

Instalación y uso de la lente de 1,5″

Installing the 1.5 inch Lens There are two thumb screws on the cover to the lens assembly. Turn them without removing them to flip the cover to the left and out of the way. Lightly tighten one of the screws to hold it in place. Remove the air assist tube (...)

06/10/2025

Grabado en el centro frente a grabado personalizado en el centro

Aprenda sobre el posicionamiento preestablecido para centrar su obra de arte, junto con técnicas para centrar gráficos desplazados.

Using Center-Center There are many ways to use Center Engraving on the Epilog Laser Dashboard. Let’s take a logo we want to engrave at the center of a coaster. In the Epilog Dashboard, choose the Advanced Tab. Next to Centering Point you’ll see a list of all (...)

03/31/2025

Cómo reparar rápidamente un grabado

¡Utiliza la cámara IRIS de Epilog para aumentar la profundidad o mejorar el grabado!

Isolate Text This initial engraving looks good, but the text portion could be deeper! We can isolate the text to improve the result. Turn off the camera. Ungroup your artwork. Select the text and Separate by Selection. You’ll see two processes listed now. Turn off the photo process. Adjust Settings (...)

03/31/2025

Creación de un diseño esférico en 3D para grabado láser

Crea un aspecto esférico utilizando la función 3D Revolve IllustratorAdobe Illustrator.

Setup the Artwork Here we have a snowflake design that we’ve replicated in an offset grid pattern to be transformed into a 3D sphere design. Select the design and drag it into the Symbols tab. Name the design And set the export type to graphic. Delete the (...)

04/01/2025

Eliminación del adhesivo del reverso del acrílico

Consejo rápido sobre cómo quitar fácilmente el adhesivo.

Spray Backing Spray the adhesive backing with Pure Citrus air freshener and let it sit for 30 seconds. Peel Backing Now the adhesive backing should be quick and easy to remove from your acrylic. Wipe Clean Wipe off the remaining residue and you’re ready to engrave or (...)

03/31/2025

Diferentes marcas que puede conseguir con un fiber laser

¿Cómo puedo obtener diferentes tipos de marcas en metal utilizando un fiber laser?

There are many different applications or finished “looks” fiber laser systems were designed to achieve. All of these looks are created using various speed, power, frequency and focus settings on the fiber laser system. Having an open-architecture system allows manufacturers to more quickly create exactly the mark they need because (...)

03/31/2025

Cómo grabar y cortar telas con láser

¿Cómo funciona el corte y grabado de telas con láser?

Fabric is quickly becoming a very popular material for both engraving and cutting. Natural fibers, as well as synthetic fabrics, are often cut and engraved with fantastic results with a laser system. This article will give an overview of some popular engraveable fabrics, as well as some fabrics we’ve learned (...)

03/31/2025

Elimine fácilmente los residuos de grabado de la madera

¿Cómo puedo eliminar los residuos pegajosos después de grabar madera?

If you’ve ever run your laser at low speed and high power, you’ve seen the results – sticky sap and varnish covering the areas you’ve already engraved. We wanted to share a product we’ve found that quickly cleans up all of that extra residue, leaving a clean, crisp engraving. Using (...)

03/31/2025

Grabado en espejo

¿Puedo grabar espejos con mi láser?

Mirror engraves beautifully with a CO2 laser and allows you to create different effects depending on which side of the mirror you are etching. Read on to learn more. In this photo we’ve engraved half of the mirror on the front of the mirror and the other half on the (...)

03/31/2025

Usar una máscara para crear un relleno de color

¿Cómo puedo rellenar mi proyecto con color?

For this exercise, we’ll be demonstrating how to use a mask or application tape to create a color fill. Application tapes are great for protecting surfaces from smoke or debris that’s created while the laser is engraving or cutting. The application tape for this exercise was provided by American Biltrite (...)

03/31/2025

Cómo crear una plantilla para el grabador Epilog

¿Cómo puedo crear una plantilla en CorelDRAW?

Creating a jig is a great way to approach engraving multiples of the same item, or when you have a large engraving job with multiple pieces of the same item with different graphics/text on each one. Another great benefit to creating and using jigs is the time savings they give (...)

03/31/2025

Sugerencias para el grabado de códigos de barras

¿Cómo puedo grabar un código de barras muy pequeño con el láser?

There are a lot of variables which determines whether your 2D barcode engraving will be successful. The contrast you can achieve on the PCB, the amount of data contained within the 2D barcode, size of barcode and most importantly, the scanner you’re using. When you’re trying to engrave a very (...)

04/01/2025

Técnicas láser

Filtros

Filtros

Instalación y uso de la lente de 1,5″

Grabado en el centro frente a grabado personalizado en el centro

Cómo reparar rápidamente un grabado

Creación de un diseño esférico en 3D para grabado láser

Eliminación del adhesivo del reverso del acrílico

Diferentes marcas que puede conseguir con un fiber laser

Cómo grabar y cortar telas con láser

Elimine fácilmente los residuos de grabado de la madera

Grabado en espejo

Usar una máscara para crear un relleno de color

Cómo crear una plantilla para el grabador Epilog

Sugerencias para el grabado de códigos de barras