Archives d'utilisation et de fonctionnement

Installation et utilisation de l'objectif 1,5 pouce

Installing the 1.5 inch Lens There are two thumb screws on the cover to the lens assembly. Turn them without removing them to flip the cover to the left and out of the way. Lightly tighten one of the screws to hold it in place. Remove the air assist tube (...)

06/10/2025

Gravure centre-centre vs gravure centre personnalisée

Découvrez le positionnement prédéfini pour centrer votre illustration, ainsi que les techniques permettant de centrer les graphiques décalés.

Using Center-Center There are many ways to use Center Engraving on the Epilog Laser Dashboard. Let’s take a logo we want to engrave at the center of a coaster. In the Epilog Dashboard, choose the Advanced Tab. Next to Centering Point you’ll see a list of all (...)

03/31/2025

Comment réparer rapidement une gravure

Utilisez la caméra IRIS d'Epilog pour augmenter la profondeur ou améliorer la gravure !

Isolate Text This initial engraving looks good, but the text portion could be deeper! We can isolate the text to improve the result. Turn off the camera. Ungroup your artwork. Select the text and Separate by Selection. You’ll see two processes listed now. Turn off the photo process. Adjust Settings (...)

03/31/2025

Création d'un motif sphérique en 3D pour la gravure laser

Créez un effet sphérique à l'aide de la fonctionnalité 3D Revolve IllustratorAdobe Illustrator.

Setup the Artwork Here we have a snowflake design that we’ve replicated in an offset grid pattern to be transformed into a 3D sphere design. Select the design and drag it into the Symbols tab. Name the design And set the export type to graphic. Delete the (...)

04/01/2025

Retrait du support adhésif de l'acrylique

Astuce rapide pour retirer facilement le film adhésif.

Spray Backing Spray the adhesive backing with Pure Citrus air freshener and let it sit for 30 seconds. Peel Backing Now the adhesive backing should be quick and easy to remove from your acrylic. Wipe Clean Wipe off the remaining residue and you’re ready to engrave or (...)

03/31/2025

Différentes marques que vous pouvez réaliser avec un fiber laser

Comment obtenir différents types de marquage sur du métal à l'aide d'un fiber laser?

There are many different applications or finished “looks” fiber laser systems were designed to achieve. All of these looks are created using various speed, power, frequency and focus settings on the fiber laser system. Having an open-architecture system allows manufacturers to more quickly create exactly the mark they need because (...)

03/31/2025

Comment graver et découper des tissus au laser

Comment fonctionne la découpe et la gravure de tissus au laser ?

Fabric is quickly becoming a very popular material for both engraving and cutting. Natural fibers, as well as synthetic fabrics, are often cut and engraved with fantastic results with a laser system. This article will give an overview of some popular engraveable fabrics, as well as some fabrics we’ve learned (...)

03/31/2025

Éliminez facilement les résidus de gravure sur le bois

Comment puis-je éliminer les résidus collants après avoir gravé du bois ?

If you’ve ever run your laser at low speed and high power, you’ve seen the results – sticky sap and varnish covering the areas you’ve already engraved. We wanted to share a product we’ve found that quickly cleans up all of that extra residue, leaving a clean, crisp engraving. Using (...)

03/31/2025

Gravure sur miroir

Puis-je graver des miroirs avec mon laser ?

Mirror engraves beautifully with a CO2 laser and allows you to create different effects depending on which side of the mirror you are etching. Read on to learn more. In this photo we’ve engraved half of the mirror on the front of the mirror and the other half on the (...)

03/31/2025

Utilisation d'un masque pour créer un remplissage de couleur

Comment puis-je remplir mon projet de couleur ?

For this exercise, we’ll be demonstrating how to use a mask or application tape to create a color fill. Application tapes are great for protecting surfaces from smoke or debris that’s created while the laser is engraving or cutting. The application tape for this exercise was provided by American Biltrite (...)

03/31/2025

Comment créer un gabarit pour la graveuse Epilog

Comment créer un gabarit dans CorelDRAW?

Creating a jig is a great way to approach engraving multiples of the same item, or when you have a large engraving job with multiple pieces of the same item with different graphics/text on each one. Another great benefit to creating and using jigs is the time savings they give (...)

03/31/2025

Suggestions pour la gravure de codes-barres

Comment graver un code-barres très petit au laser ?

There are a lot of variables which determines whether your 2D barcode engraving will be successful. The contrast you can achieve on the PCB, the amount of data contained within the 2D barcode, size of barcode and most importantly, the scanner you’re using. When you’re trying to engrave a very (...)

04/01/2025

Techniques laser

Filtres

Filtres

Installation et utilisation de l'objectif 1,5 pouce

Gravure centre-centre vs gravure centre personnalisée

Comment réparer rapidement une gravure

Création d'un motif sphérique en 3D pour la gravure laser

Retrait du support adhésif de l'acrylique

Différentes marques que vous pouvez réaliser avec un fiber laser

Comment graver et découper des tissus au laser

Éliminez facilement les résidus de gravure sur le bois

Gravure sur miroir

Utilisation d'un masque pour créer un remplissage de couleur

Comment créer un gabarit pour la graveuse Epilog

Suggestions pour la gravure de codes-barres