Archives des services et réparations

Installation du piston de mise au point automatique

Comment remplacer le piston de mise au point automatique sur ma mini helix ?

Estimated time: 15 minutes • Skill: Beginner This procedure walks you through replacing the Auto Focus Plunger on your laser system. Following these steps carefully will ensure proper installation and reliable autofocus operation after the replacement is complete. Component Overview Exploded view of the carriage assembly Preparation Power on the (...)

02/09/2026

Remplacement de la courroie de l'axe X – Mini / Helix

Comment remplacer la courroie de l'axe X sur ma Mini ?

Estimated time: 15–20 minutes • Skill: Basic This guide walks you step-by-step through replacing the X-Axis belt on an Epilog Mini or Helix laser engraver. Follow each instruction carefully to ensure proper installation and avoid damaging your machine. Always power off and unplug the engraver before beginning. To complete this (...)

10/03/2025

Installation du câble flexible de l'axe X – Mini / Helix

Comment remplacer le câble flexible de mon Epilog Mini ?

Machine Types: Epilog Mini 18/24 Tools Needed: Phillips #1 Screwdriver Turn off machine and unplug power cord. Open glass lid and locate the I-beam. Picture 1 Remove I-Beam cover by loosening the two screws on the front side of the beam and the four screws on the rear if you (...)

04/08/2025

Installation du rail de l'axe X

Comment remplacer le rail de l'axe X sur mon Epilog Mini ?

Machine Type: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver Small Philips head screw driver Flat head screw driver 3/32 Allen wrench Torx Screw Driver with 3/32 hex bit Intro: This procedure details steps to replacing the X-Axis rail on the Legend Mini. The X-Axis rail guides the (...)

04/08/2025

Installation du guide linéaire de l'axe X

Comment remplacer le roulement linéaire de mon Epilog Mini ?

Machine Types: Epilog Mini 18/24 Tools Needed: Large Philips head screw driver 3/32 Allen wrench Torx Screw Driver with 3/32 hex bit This procedure details steps to replacing the X-axis bearing set. The bearing set is the race and bearing bracket that guides the X-Axis carriage assembly from left to (...)

09/27/2024

Restaurer la précision : remplacement de la bande codeuse de l'axe X

Comment remplacer la bande encodeuse de l'axe X de mon Epilog Mini, Helix ou FiberMark?

Estimated time: 20–30 minutes • Skill: Basic This guide explains how to replace the encoder strip and reader assembly on the Epilog Mini, Helix, or FiberMark laser system. The encoder strip is the thin clear plastic strip that the encoder reader reads to determine X-Axis position; replacing it restores reliable (...)

10/15/2025

Remplacement du moteur X

Remplacez le moteur qui déplace la tête laser de votre machine le long de l'ensemble de l'axe X.

Remove Side Panels Shut off the laser and remove the power cord from the machine. Remove the left side panel by loosening the four screws on its main face, as well as the two screws on the back. Remove the right side panel by loosening the four screws on its (...)

04/11/2025

Remplacement de l'ensemble axe X

Remplacez le portique qui traverse l'axe x de votre machine.

Remove Side Panels Shut off the laser and remove the power cord from the machine. Remove the left side panel by loosening the four screws on its main face, as well as the two screws on the back. Remove the right side panel by loosening the four screws on its (...)

09/24/2024

Installation de l'ensemble axe X – FiberMark

Comment retirer l'ensemble FiberMark ?

Estimated time: 30–45 minutes • Skill: Intermediate This guide explains how to remove and reinstall the X-Axis assembly on the Epilog FiberMark laser engraver. Removing the X-Axis rail is necessary for tasks such as replacing the X-Axis belt or servicing the bearing guard on the underside of the rail. You’ll (...)

10/02/2025

Axe X

Filtres

Filtres

Installation du piston de mise au point automatique

Remplacement de la courroie de l'axe X – Mini / Helix

Installation du câble flexible de l'axe X – Mini / Helix

Installation du rail de l'axe X

Installation du guide linéaire de l'axe X

Restaurer la précision : remplacement de la bande codeuse de l'axe X

Remplacement du moteur X

Remplacement de l'ensemble axe X

Installation de l'ensemble axe X – FiberMark