1. Start by using scissors or a utility knife to cut the box straps. Stand clear of the straps, as they are under high tension and may pop out at high speed when cut.
Haal nu de omsnoeringsband en het houten deksel van de kist eraf.
2. Pull the box up and away from the pallet.
- Knip het plakband door waarmee de zak dicht zit en spreid de zak uit over de zijkanten van de machine.
- If you purchased a stand with your machine and you’d like to use it as the base for your Fusion Ascent machine, assemble the stand now, before continuing on with this lesson.
- The Fusion Ascent weight ranges from 147-212 lbs. With the help of an additional person, lift your Ascent laser system from the pallet and place it on a sturdy, level surface.
- Once you’ve removed the machine from the pallet, remove the plastic bag.
-
You’ll find the included items and materials stored underneath:
- Stroomkabel
- Ethernetkabel
- USB-kabel
- Software installeren via USB
- Snelstartgids
- Handleiding voor de gebruiker
- Inschrijfkaart en pakket voor de trainingssuite
- Materiaalmonsterpakket voor leveranciers
- Lensreiniger
- Laser Beam
- Kalibratieblad voor camera's
