Archivos de servicio y reparación

Sustitución del conjunto del eje X – Legend

¿Cómo puedo sustituir el riel del eje X en mi Legend EXT?

This procedure provides detailed, step-by-step instructions for removing and reinstalling the X-Axis I-Beam on the Legend 36EXT laser system. Proper handling and alignment of the I-Beam are essential to ensure accurate motion and optimal performance of the machine. Please follow all safety guidelines and use the recommended tools to perform (...)

04/11/2025

Sustitución de guía lineal (IKO) – Legend

¿Cómo puedo sustituir la guía lineal de mi Legend ?

This document outlines the step-by-step procedure for replacing the X-Axis linear rail assembly (bearing set) on the Epilog Legend EXT laser system. The linear rail is responsible for guiding the X-Axis carriage assembly smoothly and accurately across the engraving area. Over time, wear or damage to the rail can affect (...)

04/11/2025

Sustitución del motor del ventilador del eje X – Legend

¿Cómo puedo sustituir el ventilador del motor del eje X de mi Legend ?

This document provides detailed instructions for installing the X-motor fan on the Epilog Legend EXT laser system. Proper cooling is essential for reliable motor performance, and this procedure ensures the fan is securely mounted and correctly connected. Before beginning, make sure the engraver is powered off and disconnected from its (...)

04/11/2025

Sustitución del motor del eje X – Legend

Este documento detalla la instalación del motor del eje X en un Legend .

This document provides step-by-step instructions for replacing the X-axis motor in the Epilog Legend 36EXT laser system. The X motor plays a critical role in ensuring accurate movement of the laser carriage, and proper installation is essential for maintaining optimal engraving performance. Before beginning this procedure, ensure the machine is (...)

04/11/2025

Sustitución del émbolo del enfoque automático – Legend

Este documento proporciona instrucciones detalladas sobre cómo sustituir el sensor de enfoque automático en un legend EXT.

This document outlines the step-by-step procedure for replacing the Auto Focus sensor on the Epilog Legend EXT laser system. Before beginning, make sure the machine is powered off to ensure safety during the process. Familiarity with the X-carriage assembly is recommended; refer to the exploded view diagram for part identification (...)

04/11/2025

Instalación del cable flexible del eje X – 36EXT

¿Cómo instalo el cable flexible del eje X en mi 36EXT?

The X-axis flex cable plays a crucial role in the operation of the Epilog Legend 36EXT engraver. Over time, the cable may wear out or become damaged, requiring replacement. This guide provides step-by-step instructions to safely replace the X-axis flex cable, ensuring that your engraver continues to perform at its (...)

04/08/2025

Instalación de la correa del eje X – 36EXT

¿Cómo puedo sustituir la correa del eje X de mi 36EXT?

This procedure details steps to replace the belt that carries the laser head. These belts may get worn out and must be replaced for optimal performance from your machine. Always ensure proper safety precautions are taken when servicing hardware components. Procedure Steps Step 1 Remove side panels Remove both side (...)

08/21/2026

Instalación de la tira del codificador

¿Cómo instalo la tira codificadora en mi 36EXT?

El documento adjunto le guiará a través del proceso de sustitución de la tira del codificador en un 36EXT.

09/24/2024

Eje X

Filtros

Filtros

Sustitución del conjunto del eje X – Legend

Sustitución de guía lineal (IKO) – Legend

Sustitución del motor del ventilador del eje X – Legend

Sustitución del motor del eje X – Legend

Sustitución del émbolo del enfoque automático – Legend

Instalación del cable flexible del eje X – 36EXT

Instalación de la correa del eje X – 36EXT

Instalación de la tira del codificador