Filtros
Legend
Filtros
Technical Specifications
|
Máquina láser:
|
Legend
Legend
Discontinued
|
|---|---|
|
Machine:
|
— |
|
Work Area:
|
36″ x 24″ (914 x 610 mm) |
|
Material Thickness:
|
12″ (305 mm) |
|
Maximum Material Thickness with Table Removed:
|
14″ (355 mm) |
|
Laser Source Wattages:
|
30, 40, 50, 60, 75 or 120 watts |
|
Laser Source:
|
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
|
Air Assist:
|
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. |
|
Red Dot Pointer:
|
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire. |
|
Relocatable Home:
|
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Series. |
|
Software:
|
The Laser Dashboard controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. |
|
Memory:
|
Store unlimited files up to 64MB. Rolling buffer allows files of any size to be engraved. |
|
Operating Modes:
|
Optimized raster, vector or combined modes with engraving and cutting in one job. |
|
Motion System:
|
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoder technology for precise positioning. |
|
X-Axis Bearings:
|
Ground and polished stainless steel long-lasting bearings. |
|
Print Interface:
|
10 Base-T Ethernet or USB connection. |
|
Size (W x D x H):
|
50.5″ x 33″ x 42″ (1283 x 838 x 1067 mm) – (120 watt: 36″/914 mm deep). |
|
Weight:
|
440 libras (199 kg) |
|
Electrical:
|
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Ventilation:
|
External exhaust to the outside or internal filtration system required. There are two output ports, each 6″ in diamter. |
|
Class:
|
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. |
|
Super-Silent Cooling Fans:
|
64 db (not available on the 120 watt). |