Important Note:
- All focus calibration procedures must be completed before performing a camera calibration to ensure accurate results.
- Camera calibration is only necessary if recommended by Epilog’s Technical Support.
- Before beginning, reboot your machine if you have recently run any jobs.
- An official Epilog Calibration Mat is necessary for the Overhead Camera process.
- If the mat is curled, allow it to sit on a flat surface until it is perfectly flat. An unrolled, flat mat is essential for accurate results.
- It is advised to remove the calibration mat from the cardboard tube it is shipped in and laying it checkerboard side down on a flat surface at least an hour before completing the camera calibration. This ensures that the calibration mat will lay flat in the engraver and will result in a more accurate camera calibration.
Camera Calibration Mat