Service and Repair Archives

Optics Cleaning – Fusion Maker, Edge, and Pro

This document details how to properly clean the Fusion Maker, Edge, and Pro carriage optics.

Daily Maintenance Cleaning Remove the lens and carriage mirror. Safely detach both the lens and carriage mirror using the video guide below. Figure 1. Lens and carriage mirror removal process. Carriage Optics Removal Steps Disconnect the air tubing from the lens. Loosen the thumb screws on the carriage cover and (...)

12/31/2025

Cleaning Procedures – Legend 36EXT

This procedure outlines the recommended steps for cleaning the Epilog Legend 36EXT laser system. Regular cleaning is essential to maintain optimal performance, extend the life of mechanical and optical components, and ensure high-quality engraving and cutting results. This guide covers key areas such as lenses, mirrors, motion components, fans, and (...)

12/31/2025

Cleaning Procedures – Fusion Maker, Edge, and Pro

This document details the general cleaning and maintenance of the Fusion Maker, Edge, and Pro machine.

Regular cleaning of the Fusion Pro engraver will result in a longer service life of the engraver and less down time. Additionally, regular cleaning of the Fusion Pro engraver can mitigate the risk of flare-ups and other thermal events. A mild household cleaner or degreaser can be used to clean (...)

12/31/2025

Cleaning the Encoder Strip: Essential Maintenance for Accurate Printing

A clean linear encoder strip helps your machine achieve accurate positioning.

Procedure Power down and unplug the machine. For your safety, completely turn off the laser system and disconnect the power cord from the back of the machine before beginning. Loosen the assembly cover screws. Using a Phillips head screwdriver, loosen the seven screws that secure the X-Axis assembly cover. There (...)

12/31/2025

Cleaning and Maintenance – Mini / Helix

How do I keep my Helix/Mini clean?

Please find the attachment for an in-depth description.

12/31/2025

Bearing Rails

Keep your bearing rails clean to promote smooth performance.

To begin the procedure of cleaning and greasing the bearing rails, shut off the laser and remove the power cord from the machine. Clean the Bearing Rails Manually position the lens assembly to one side. Apply rubbing alcohol to a cotton swab. Clean one end of the bearing rail by (...)

12/31/2025

Bearing Rails

Keep your bearing rails clean to promote smooth performance.

Remove Assembly Cover To begin the cleaning and greasing of the bearing rails, shut off the laser and remove the power cord from the machine. Loosen, but do not remove, the five Phillips head screws along the back of the X-Axis Assembly, as well as the two screws on the (...)

12/31/2025

Cleaning Your Optics

Cleaning your lens and mirrors is an essential part of routine maintenance.

Move X-Axis Assembly To start the optics cleaning procedure, with the machine powered on, use the control panel to scroll down to ‘Jog.’ Then use the joystick to move the x-axis assembly toward the middle of the machine to provide you easier access to the lens assembly and mirrors. Shut (...)

12/31/2025

Cleaning

Filters

Filters

Draining the Filter Regulator Module

Carriage Optics Cleaning

Laser System Preventative Maintenance

Cleaning and Greasing the Linear Guide (IKO)

Optics Cleaning – Fusion Maker, Edge, and Pro

Cleaning Procedures – Legend 36EXT

Cleaning Procedures – Fusion Maker, Edge, and Pro

Cleaning the Encoder Strip: Essential Maintenance for Accurate Printing

Cleaning and Maintenance – Mini / Helix

Bearing Rails

Bearing Rails

Cleaning Your Optics