Backplane Board Replacement – Fusion Galvo
This document outlines the replacement of the backplane board in the G100.
Filters
Floating Backplane Upgrade
Applies to: Fusion Pro 32 • Fusion Pro 48 This guide provides step-by-step instructions for upgrading the floating backplane board in Fusion Pro 32 and 48 engravers. Designed for models manufactured before mid-2020, this procedure ensures proper installation and configuration of the new backplane board. By following these instructions, you (...)
SD Card and Coin Battery Replacement – Fusion Pro 32 & 48
This guide provides instructions for replacing the SD card and coin battery in the control module of Fusion Pro 32 and 48 systems. Always follow proper anti-static precautions and use the correct tools and parts. Control Module Removal Turn off the engraver. Disconnect the engraver from the power source. Disconnect (...)
X-Axis Encoder Reader Install – Mini / Helix
This article provides step-by-step instructions for replacing the X-axis encoder read head in Epilog Laser engravers, specifically for the Mini 18×12, Mini 24×12, and Helix 24×18 models. The procedure outlined below will guide you through the necessary steps to successfully replace the read head, ensuring that the X-axis system functions (...)
Y-Axis PCB Install – Mini / Helix
Please find the attachment for an in-depth description.
Backplane Install – Zing
Please find the attachment for an in-depth description.
Control Board Install – FiberMark
Please find the attachment for an in-depth description.
Controller Board
Remove Old Control Board Shut off the laser and remove the power cord from the machine. Remove any Ethernet and USB cables from the back of the machine. Put on the anti-static wrist strap. Always wear the anti-static strap when handling the control board to avoid damaging the unit through (...)