The Settings menu has 8 sub-menus.
Home
This menu allows you to set an offset to the Home position.
Tutorial
This menu allows you to set up your machine. It is the same process as when you set up your laser for the first time, including a demo job to test the machine.
-
Focus
This menu includes options to calibrate the table, CO2 or fiber focus, or the plunger.
-
Laser
This menu allows you to fine-tune your laser’s settings.
-
Backup
This option allows you to backup and restore the machine’s factory settings.
-
Network
This menu allows you to set up your machine’s network settings via Ethernet or USB, and by Wi-Fi on machines supplied outside the EU and EEA.
-
Alignment
This menu is used for aligning the laser of the machine.
-
Update
This menu is used for updating the peripherals of the machine.