IRIS Camera Calibration Guide
Estimated Time: 20–40 Minutes • Skill Level: Intermediate Important: All focus calibration procedures must be completed before performing a camera...
Fusion Ascent
Filters
Quick Guide: Calibrating the Joystick for Accurate Movement
Steps to Calibrate the Joystick Open the Settings Menu On the display panel, press the gear icon in the top-right...
Focus Calibration Wizard
Estimated Time: 5–10 Minutes | Skill Level: Basic The Focus Calibration Wizard allows the laser system to automatically...
Autofocus Calibration Wizard
Estimated Time: 2–5 Minutes | Skill Level: Basic The Autofocus Calibration Wizard allows the laser system to automatically...
LC1000 – Control Module Port and LED Overview
The control module on Epilog laser systems provides connection points and LED indicators that offer system status and control feedback....
Laser System Preventative Maintenance
Updated March 2026 | Frequency may vary based on material usage and throughput. To ensure peak performance and extend the...
Carriage Optics Cleaning
Estimated time: 10–15 minutes • Skill: Beginner Routine inspection and cleaning of the carriage optics ensures consistent engraving performance and...
Magnetic Encoder Strip Replacement
Estimated Time: 10–15 Minutes Skill Level: Basic The encoder strip is a magnetic positioning strip mounted along the X-Axis rail....
Air Assist Solenoid Configuration Update
This guide provides troubleshooting steps if your Ascent laser’s air assist solenoid is not energizing properly and is failing to...
Air Assist Solenoid Replacement
This guide provides step-by-step technical instructions for replacing the air assist solenoid assembly on your Ascent laser system. Safety First:...
Control Board Airflow Optimization
Estimated Time: 5-10 Minutes • Skill Level: Beginner To ensure your Ascent laser maintains peak performance and sustained reliability during...