Status Indicator
In the bottom left corner of the screen you will see text displaying the current status of the machine. Homing:...
Fusion Ascent
Filters
Symbols
Go/Stop Button Press the Go/Stop button to start and pause a job. Pressing the Go/Stop button during a running job...
Editing Job Settings at the Machine
Print a job to the Ascent. Long press on the job and the Speed and Power values will come up....
Instellingenmenu
The Settings menu has 8 sub-menus. Home This menu allows you to set an offset to the Home position. Tutorial...
Configuratiemenu
The Configuration menu has three sub-menus: System, Network, and About Machine. System Once selected, the System Settings display detailed information...
Geavanceerde instellingen
Access the Advanced Settings Menu by first going to the Settings Menu, then long pressing the text “Settings” at the...
Jog Menu
Access the Jog Menu by pressing the Jog key, which will turn green when active. The Jog Menu allows you...
Focus Menu
To access the Focus Menu press the Focus key, which turns green when active. The Focus Menu is used for...
Setting Park Position / Resetting Park Position
To set a new Park Position, press the Settings gear button in the upper right corner. Under the Settings menu,...
Enabling / Disabling Wireless
Note: Wi-Fi is factory-disabled on machines shipped to the European Union and cannot be enabled by the user 1. To...
Joystick
The Joystick feature is used in Jog mode and Focus mode. The Joystick is progressive and touch sensitive and provides...
Job Storage
The Fusion Ascent has 1 GB of permanent storage. While powered on, the machine will store any and all jobs...
IRIS™ Camera Positioning System
The Fusion Ascent includes the IRIS™ Camera Positioning System which allows you to accurately place your artwork on screen in...
Touch Screen
The Fusion Ascent is controlled by a 7” capacitive resolution touch screen. This feature allows you to select between jobs,...
Luchtondersteuning
The Air Assist feature on the Fusion Ascent systems is used to keep combustible gases away from the cutting surface...
Auto Focus vs Manual Focus
In order to engrave or cut a crisp, clean image, your material must be the correct distance from the bottom...
Key Switch
The Key Switch feature is used to power the Fusion Ascent on and off, and also allows you to lock...
Rode puntwijzer
The Red Dot Pointer is a visible laser beam that runs in the same line as the invisible CO₂ laser...