Support Center > Knowledge base> Article: Laser Resolution and How it Affects Engraving

Laser Resolution and How it Affects Engraving

Article ID: 42829 Email Print
Question
How does the resolution I choose affect my engraving?

Answer

Higher laser resolution equates to finer detail in your engraving. With the exception of the Zing Starter Series, which goes up to 1000 DPI, the rest of Epilog's product line can engrave at resolutions up to 1200 DPI.

Resolution is only one factor in determining image quality. The initial quality of the artwork has a greater influence over the quality of your engraving. In other words, even the highest resolution will not improve low-quality artwork. Also, keep in mind that image quality is subjective - 300 DPI may be adequate for some images, while others require a minimum of 600 DPI.

Here we'll discuss different laser resolutions and illustrate how they affect engravings.

 

Different Settings for Different Uses:

75 - 200 DPI: Use settings in this range for non-production purposes where you're experimenting with image location or are creating a rough draft of a particular project.

300 DPI:- This resolution is ideal for production work where image quality does not need to be extremely detailed. Simple shapes, objects with little shading differences and text (especially large, block text) engrave well at 300 DPI.

400 DPI - This resolution value is ideal for many applications. It combines very good image quality with fast engraving times. Many users like 400 DPI for all of their work.

600 DPI - When exceptionally fine detail or overall excellent results are required, most users choose 600 DPI.

1200 DPI - This resolution is used for projects that require the highest engraving quality possible, although it's rarely used because it takes twice as long to perform an engraving at this resolution (as opposed to 600 DPI, which is ideal for most projects.)

 

Resolution and engraving time:
Resolution choice has a significant impact on engraving time as well. Images engraved at a higher resolution will take longer than those at a lower resolution.

See the image below. Using a 45-watt Helix, we took the same gray scale clip art image and engraved it at 45 percent speed and 100 percent power. The only thing that changed between each engraving is the resolution. Can you see the significant difference in quality and engraving times?

150 DPI
1:01 engraving time

 

300 DPI
1:53 engraving time

 

400 DPI
2:28 engraving time

 


600 DPI
3:33 engraving time



1200 DPI
6:57 engraving time

It's a matter of personal preference as to which resolution looks better, but these photos show the dramatic difference resolution can make, especially when engraving with grayscale images.


related articles

Article Details
13657 Created on: Mar 12, 2014
Date updated: Mar 12, 2014
Tagged: resolution


Poor Outstanding