Windows 11 TCP/IP Port Setup

Setting up a direct connection through Ethernet requires a static TCP/IP address on your computer. The address of the TCP/IP Port is not the same as the IP address for the laser.

Note: The laser should be on and connected with an Ethernet cable before beginning

1. In the search bar at the bottom of the screen, type Settings.

2. Click Open.

3. Click Network and Internet.

4. Click Advanced Network Settings.

5. Select the drop down arrow next to the lasers Ethernet connection.


Note: If you have multiple network options here, look for the one labeled Unidentified Network. You can also disconnect and reconnect the laser to identify its connection.

6. Next to More Adapter Settings, click Edit.

7. Select Internet Protocol Version 4 (TCP/IP).then click Properties.

8. Select Use the Following IP address. Type 192.168.3.3 into the IP address.

Note: The last digit of the IP address will be different from the IP address of the laser.


9. Click the Subnet Mask field. It will autopopulate with 255.255.255.0.
10. Click OK to complete setup.

Summary:

You’ve now completed the TCP/IP setup required for a direct connection. For more information on setting up your machine please check out the related articles on the right.