Adjusting the Home and Park Positions
This document outlines the home and park position adjustment procedures for the Fusion Maker, Fusion Edge, and Fusion Pro.
Filters
Focus and Camera Calibrations – Fusion Galvo
Please find the attachment for an in-depth description.
X-Axis Belt Tensioning Guide
Identifying X-Axis Rail Version Before you begin, determine which version of the X-Axis rail is installed in your machine. Check the right side of the X-Axis rail: if there is no cutout, you have Revision 1; if there is a cutout, you have Revision 2. Follow the corresponding procedure based (...)
Full Guide: Replacing the Laser Assembly
Estimated time: 20–30 minutes • Skill: Intermediate This procedure will guide you through the process of removing and installing the laser assembly in your Epilog Zing 16 laser system. Following these steps ensures proper alignment, secure mounting, and optimal performance of your engraving system. Laser Removal Power down and disconnect (...)
X-Axis Carriage Install – Zing
Lens carriage removal procedure in the Zing engraver.
Laser Tube Install – Mini / Helix
Machine Types: Epilog Mini 18/24 and Helix Tools needed: Phillips head screwdriver #1 Turn offand unplug the laser system. Facing the back of the machine, remove the 9 screws using the Phillips head screwdriver on the back panel. The laser tube is silver in color and sits directly above the (...)
Squaring the Y-Axis Actuators
Estimated time: 20–30 minutes • Skill: Intermediate This procedure explains how to square the Y-Axis rails on 16K-series laser systems. Proper squaring ensures smooth motion, accurate engraving, and prevents premature wear on the motion system components. Y-Axis Squaring Procedure Power off and disconnect the machine. Shut down the laser system (...)
Extended Cold Start Guide
Lasers that have been inactive for a period of time may not fire right away. There are settings in the machine to help warm the laser before use. Please start with the CO2 Laser Tickle Settings guide first. If the laser has been inactive for an extended period of time, (...)
Power Supply Replacement – Fusion Pro 32 & 48
Power Supply Locations CO2- Only Fusion Pro This model will contain only the CO2 power supply shown above. One (1) 48V 2kW power supply Fiber- Only Fusion Pro This model will contain the CO2 and fiber power supplies shown above One (1) 48V 2kW power supply One (1) 24V 1kW (...)
Optics Replacement – Mini/Helix
This guide provides step-by-step instructions for replacing the carriage, steering, and periscope optics in your laser system. Follow the outlined procedures carefully to ensure proper installation and alignment. Always handle optics with care and refer to the provided alignment links after replacement to maintain optimal performance. Replacing Carriage Optics Move (...)
CO2 Laser Tickle Settings
Introduced in the Epilog Mini and Helix engravers, laser tickle settings allow the user to customize certain CO2 laser characteristics by modifying the radio frequency (RF) signals sent to the laser tube. The role of the RF signal is to excite and energize the gas mixture within the CO2 laser (...)
Replacing the Control Panel
Replacing the Control Panel Before we begin, turn off and unplug the Fusion Pro. Using a 5/32” Allen Key, remove the right side panel from the machine. Open the display panel package you received and put on the anti-static strap. Clip the strap onto any metal part of the machine. (...)