Table Level Procedure
Please find the attachment for an in-depth description.
Filters
X-Axis Belt Tension
Please find the attachment for an in-depth description.
Laser Alignment – Legend 36EXT
Please find the attachment for an in-depth description.
CO2 Laser Alignment – Zing 24
Estimated time: 60–90 minutes • Skill: Advanced This guide outlines the procedure for aligning the laser beam inside the Epilog Zing 24 engraver. Following these steps will ensure the optics are properly aligned for consistent laser performance and engraving quality. SAFETY GLASSES REQUIRED: Always wear safety glasses or protective eyewear (...)
Cleaning and Maintenance – Mini / Helix
Please find the attachment for an in-depth description.
CO2 Laser Alignment – Fusion Pro 32 & 48
Please find the attachment for an in-depth description.
Focus Calibrations – Fusion Maker, Edge, and Pro
Please find the attachment for an in-depth description.
Fiber Alignment – Fusion Pro 32 & 48
This guide provides step-by-step instructions for performing precise laser alignment on the Fusion Pro CO2 and Fiber laser systems. Proper alignment ensures optimal engraving performance and reduces the risk of hardware damage. Whether you’re troubleshooting a drop in laser power or aligning after maintenance, this document will walk you through (...)
Touchpad Calibration – Fusion Maker, Edge, and Pro 24 and 36
Estimated time: 5 minutes • Skill: Basic Touchscreen calibration ensures accurate touch response when selecting options and settings on the display. This procedure is rarely required and should only be performed if the touchscreen is registering incorrect inputs or responding inconsistently. Touchscreen Calibration Procedure Open the Settings menu. At the (...)
Fiber Laser Alignment
Fiber laser alignment is a crucial maintenance procedure to ensure the optimal performance of your Fusion Edge and Fusion Pro laser engravers. Over time, misalignment can occur due to regular use, component replacement, or moving the machine to a new location. This guide provides a step-by-step process for checking and (...)
Leveling the Table
This document outlines the table leveling procedure for the Fusion Maker, Edge, and Pro 24 and 36. Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance (...)
Leveling the Table
This document outlines the table leveling procedure for the Fusion Pro 32 and 48. Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance from the focusing (...)