Service and Repair Archives

Touchpad Calibration – Fusion Maker, Edge, and Pro 24 and 36

How do I calibrate the touchpad on the Fusion Maker, Edge, and Pro 24 and 36?

Estimated time: 5 minutes • Skill: Basic Touchscreen calibration ensures accurate touch response when selecting options and settings on the display. This procedure is rarely required and should only be performed if the touchscreen is registering incorrect inputs or responding inconsistently. Touchscreen Calibration Procedure Open the Settings menu. At the (...)

01/27/2026

Pro 24, Pro 36

Fiber Laser Alignment

How do I align the fiber laser in the Fusion Maker, Edge, and Pro 24 and 36?

Fiber laser alignment is a crucial maintenance procedure to ensure the optimal performance of your Fusion Edge and Fusion Pro laser engravers. Over time, misalignment can occur due to regular use, component replacement, or moving the machine to a new location. This guide provides a step-by-step process for checking and (...)

12/31/2025

Pro 24, Pro 36

Leveling the Table

How do I level the table in the Fusion Maker, Edge, and Pro 24 and 36?

This document outlines the table leveling procedure for the Fusion Maker, Edge, and Pro 24 and 36. Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance (...)

12/31/2025

Pro 32, Pro 48

Leveling the Table

How do I level the table in the Fusion Pro 32 and 48?

This document outlines the table leveling procedure for the Fusion Pro 32 and 48. Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance from the focusing (...)

12/31/2025

Adjusting the Home and Park Positions

How do I adjust the home and park positions in the Fusion Maker, Fusion Edge, and Fusion Pro?

This document outlines the home and park position adjustment procedures for the Fusion Maker, Fusion Edge, and Fusion Pro.

12/30/2025

Focus and Camera Calibrations – Fusion Galvo

How do I calibrate the focus and camera system in the Fusion Galvo?

Please find the attachment for an in-depth description.

12/31/2025

FiberMark Home Position Calibration

How do I set the X-Y home position on the FiberMark?

The attachment shows the home calibration procedure for the Fibermark 24×12 engraver.

12/31/2025

Quick Guide: Calibrating the Joystick for Accurate Movement

Calibrating the joystick can resolve issues like delayed movement, inaccurate control, or the carriage drifting on its own while in jog mode.

Steps to Calibrate the Joystick Open the Settings Menu On the display panel, press the gear icon in the top-right corner to open the Settings menu. Image 1: Home screen with gear icon in top-right corner Access Advanced Settings Press and hold the word “Settings” on the screen until the (...)

03/16/2026

Pro 24, Pro 36

Laser Alignment – Maker / Edge / Pro

Adjust your optics system's mirrors to ensure your laser fires precisely.

Turn On To begin the laser alignment procedure, power on the laser. For the following procedures, the table will be broken into four (4) positions. Each position is identified by its relative distance to the laser source and corresponds with the mirror to adjust for that position. Three of the (...)

12/31/2025

Laser Alignment – Zing

Adjust your optics system's mirrors to ensure your laser fires precisely.

Mark the Laser Alignment Target To begin the laser alignment procedure, in your graphics software, set your page size equal to your machine’s table size and create a small ¼” by ¼” black filled box in the upper right corner of the page, then send it to the laser. Install (...)

12/31/2025

MX

Laser Alignment – Mini / Helix

Adjust your optics system's mirrors to ensure your laser fires precisely.

Mark the Alignment Target To begin the laser alignment procedure, on the control panel, press the maintenance button to bring up the maintenance menu on the display. Use the up and down arrow buttons to scroll to ‘Align Laser’. Then press the green ‘Go’ button. The display should now say (...)

02/10/2026

Laser Alignment – Fusion / Fusion M2

Adjust your optics system's mirrors to ensure your laser fires precisely.

Alignment Target Place the alignment target in the round opening on the side of the lens assembly. Then cover the alignment target with a small piece of masking tape. On the control panel, use the arrow buttons to select ‘Jog.’ Then use the joystick to move the lens carriage to (...)

12/31/2025

Calibrations

Filters

Filters

Touchpad Calibration – Fusion Maker, Edge, and Pro 24 and 36

Fiber Laser Alignment

Leveling the Table

Leveling the Table

Adjusting the Home and Park Positions

Focus and Camera Calibrations – Fusion Galvo

FiberMark Home Position Calibration

Quick Guide: Calibrating the Joystick for Accurate Movement

Laser Alignment – Maker / Edge / Pro

Laser Alignment – Zing

Laser Alignment – Mini / Helix

Laser Alignment – Fusion / Fusion M2