Y-Axis Slider Block Install – Mini / Helix
Y-Axis slider block replacement for the Mini and Helix engravers.
Y-Axis Slider Block Install – FiberMark
Please find the attachment for an in-depth description.
Y-Motor Replacement
Remove Panels Remove the top access panel on the right side of the machine by using a 5/32” hex key to turn the black panel locks ¾ of the way counter-clockwise. Use a 5/32” hex key to remove the two main panels on the back of the machine. Remove Old (...)
Y-Motor Replacement
Remove Right Panel Remove the right side panel by removing the 6 screws, 4 located on the side of the machine, two located on the back of the machine. Remove Old Y-Motor Open the front access door. Locate the Y-Motor on the right hand-side of the machine. Remove the spring (...)
Y-Motor Replacement
Remove Rear Panel Loosen the two screws on the back of the machine and remove the back panel. Remove Old Y-Motor Using a 3mm hex key, loosen the four hex screws located on the drive couplers located on both sides of the Y-Motor. Slide the drive couplers away from the (...)
Y-Motor Replacement
Remove Panels Turn off and unplug the machine. Each Fusion Edge is fitted with two Y motors. Determine which Y Motor, left or right-hand side, you will be replacing and remove that side panel from the machine. Using a 5/32″ Allen wrench, remove the 8 screws that secure the left (...)
Y-Axis Sensors
Remove Panel We’ll start by replacing the front sensor, then move on to the rear sensor. Shut off the laser and remove the power cord from the machine. Remove the top access panel on the left side of the machine by using a 5/32” hex key to turn the black (...)
Y-Axis Assembly
Remove Panels Shut off the laser and remove the power cord from the machine. We’ll begin by replacing the y-axis on the right-hand side of the machine. Use a 5/32” hex key to remove the exhaust plenum on the rear of the machine. Then remove the small panel in the (...)
Y-Axis Belt Replacement – Zing
Replacing the Y-axis belt on your Epilog Zing laser machine is a straightforward process that ensures optimal performance and precision for your engraving and cutting projects. Whether you’re working with a Zing 16 or Zing 24 model, this step-by-step guide will walk you through the necessary tools and procedures to (...)
- 1
- 2