Skip to main content

Epilog Support

Knowledge Base
Training

Support Resources

Software & Firmware Downloads
Owner's Manuals
Register Your Machine
Remote Session
Support Process
Explore Epiloglaser.com

Submit a Ticket

Knowledge Base
Training
Resources

Knowledge Base

Laser Machine:

Drivers & Software

Manual Downloads

Filters

Categories:

Getting Started (47)

All Getting Started

Usage and Operation (128)

All Usage and Operation System Requirements & Setup (32) Machine Control & Settings (2) Laser Techniques (13) Software Techniques (41) Projects (26) Rotary (3) FAQ (10)

Service and Repair (282)

All Service and Repair Troubleshooting (10) Control / Circuit Boards (33) X-Axis (69) Y-Axis (21) Table / Grid (23) Optics (9) Cameras (8) Laser Source (28) Power / Electrical (14) Chassis (12) Accessories (2) Calibrations (35) Cleaning (18)

Machine Resources:

Drivers & Software
Manual Downloads
Material Settings
Tech Specs

Results: 456 items found

View:

Order by

Relevance

Filters

Categories:

Getting Started (47)

All Getting Started

Usage and Operation (128)

All Usage and Operation System Requirements & Setup (32) Machine Control & Settings (2) Laser Techniques (13) Software Techniques (41) Projects (26) Rotary (3) FAQ (10)

Service and Repair (282)

All Service and Repair Troubleshooting (10) Control / Circuit Boards (33) X-Axis (69) Y-Axis (21) Table / Grid (23) Optics (9) Cameras (8) Laser Source (28) Power / Electrical (14) Chassis (12) Accessories (2) Calibrations (35) Cleaning (18)

Machine Resources:

Drivers & Software
Manual Downloads
Material Settings
Tech Specs

Galvo Platform (Z-Axis) Motor Replacement

Galvo Platform (Z-Axis) Motor Replacement

This guide covers replacing the z-axis (galvo platform) motor on the Fusion Galvo G100. The motor is reached through the bottom of the engraver. Parts Required LC0489 – Assy, Table Motor Tools Required T30 and T20 Torx Drivers 9/64″ Allen Wrench Safety First: Ensure the engraver is completely powered off (...)

Z-Axis Belt Replacement

Z-Axis Belt Replacement

This guide covers replacing the z-axis belt on the Fusion Galvo G100. The belt is reached through the bottom of the engraver by removing the z-axis motor. Parts Required GC0031 – Belt, 3mm, Z-Axis, G100 Tools Required T30 and T20 Torx Drivers 9/64″ Allen Wrench Safety First: Ensure the engraver (...)

Main Power Supply Replacement

Main Power Supply Replacement

This guide covers the removal of the main power supply (PSU) assembly from the Fusion Galvo G100 and the installation of the replacement assembly. Parts Required GC0149 – Assy, Power Supply, 600W, ±15VDC Tools Required T30 and T20 Torx Drivers Safety First: Ensure the engraver is completely powered off and (...)

Lead Screw Replacement

Lead Screw Replacement

This guide covers replacing a table lead screw on the Fusion Galvo G100. It shows the right-side lead screw; the left-side procedure is identical. The galvo platform is supported on the shipping brackets while the lead screw is out. Parts Required LC0792 – Assy, Leadscrew, Table, 1/2OD Tools Required T30 (...)

Interlock Sensor Replacement

Interlock Sensor Replacement

This guide covers replacing the two door interlock sensors on the Fusion Galvo G100. The sensors sit at the front edge of the worktable and are reached with the door open. Parts Required LC0690 – Assy, Interlock, PCBA Tools Required T10 Torx Driver Safety First: Ensure the engraver is completely (...)

Fiber Power Supply

Fiber Power Supply

This guide covers replacing the fiber laser power supply (48V to 24V DC-DC converter) on the Fusion Galvo G100. The power supply is reached through the bottom of the engraver. Parts Required LC0437 – Power Supply, +48V to +24V DC-DC Tools Required T30 Torx Driver Phillips Screwdriver Safety First: Ensure (...)

Fiber PCB Replacement

Fiber PCB Replacement

This guide covers replacing the fiber controller PCB on the Fusion Galvo G100. The PCB is reached through the bottom of the engraver. Parts Required LC0808 – PCBA, Fiber Controller Tools Required T30 and T10 Torx Drivers Safety First: Ensure the engraver is completely powered off and the power cord (...)

Fiber Laser Replacement

Fiber Laser Replacement

This guide covers replacing the fiber laser on the Fusion Galvo G100. The fiber head is removed from the top of the engraver, and the laser itself is removed through the bottom. Parts Required Fiber Laser – varies depending on wattage and engraver configuration Tools Required T30 Torx Driver Phillips (...)

LightBurn Connection Guide

LightBurn Connection Guide

Early Access – LightBurn Labs You can now run your Epilog laser from LightBurn. Epilog has been working with the LightBurn team to bring Epilog support to LightBurn 2.2, and early access is available today in LightBurn 2.2 RC3. Epilog support is released as a LightBurn “Labs” feature. That means (...)

Cleaning the Overhead and Carriage Cameras

Cleaning the Overhead and Carriage Cameras

Cleaning the Overhead and Carriage Cameras Your laser machine uses several cameras to help you position and align your work: overhead cameras mounted in the lid, and a carriage camera that travels with the laser head. Over time, smoke residue and dust build up on these lenses, which can make (...)

Updating the Firmware (1.0.8.8 and below)

Updating the Firmware (1.0.8.8 and below)

The steps below will guide you through the process of updating your firmware if you are running firmware version 1.0.8.8 or older. If you are on a newer version (1.0.9.0 or later), please refer to the appropriate update instructions linked on the right. Download the latest firmware file from the (...)

Top Door Replacement

Top Door Replacement

This guide provides step-by-step instructions for removing and replacing the top door assembly on an Epilog Ascent laser machine. Power Safety: Always turn off and unplug the machine before starting any service or disassembly work. Top Door Replacement Follow these steps to safely disconnect, remove, and install a new top (...)

1
2
3
...
38

Need additional help?

Submit a ticket with our Technical Support Team

Submit a Ticket

Product

Product Line
Applications
Start a Laser Business

Support

Support Process
Submit a Ticket
Shop Parts & Accessories

Company

About Us
Careers
Contact Us
Find Your Rep

Sign up for our Newsletter

"*" indicates required fields

Name

This field is for validation purposes and should be left unchanged.

First name*

Last name*

Email

Epilog is proud to be an American company. Since 1988 we have been designing, engineering, and supporting our laser machines in Golden, Colorado.

© Epilog Laser | All Rights Reserved. | Privacy Policy