120-Watt CO2 Laser Tube
Remove Panel Shut off the laser and remove the power cord from the machine. Use a 5/32” hex key to...
Adjusting the Home and Park Positions
This document outlines the home and park position adjustment procedures for the Fusion Maker, Fusion Edge, and Fusion Pro.
Adjusting the Top Door Bumpers to Resolve Interlock Issues
Estimated time: 10–15 minutes • Skill: Beginner This procedure describes how to correctly adjust the top door bumpers so the...
Adjusting the X-Axis Belt Tracking
Estimated time: 30-45 minutes • Skill: Advanced This procedure outlines the proper method for adjusting belt tracking on the belt...
Air Assist Solenoid Configuration Update
This guide provides troubleshooting steps if your Ascent laser’s air assist solenoid is not energizing properly and is failing to...
Air Assist Solenoid Replacement
This guide provides step-by-step technical instructions for replacing the air assist solenoid assembly on your Ascent laser system. Safety First:...
Air Assist Tubing Replacement – Fusion Maker, Edge, Pro 24 & 36
The Air Assist (AA) Tubing in your engraver plays a crucial role in ensuring optimal performance by directing a stream...
Applying Thermal Compound to Large Aperture Fusion Pro Optics
On the large aperture Fusion Pro systems, the optics are designed with a thermal compound applied between the mirror and...
Autofocus Calibration Wizard
Estimated Time: 2–5 Minutes | Skill Level: Basic The Autofocus Calibration Wizard allows the laser system to automatically...
Autofocus Plunger Install
Estimated time: 15 minutes • Skill: Beginner This procedure walks you through replacing the Auto Focus Plunger on your laser...
Autofocus Plunger Replacement – Legend 36EXT
This document outlines the step-by-step procedure for replacing the Auto Focus sensor on the Epilog Legend EXT laser system. Before...
Autofocus Repair Guide: Replacing the Autofocus Plunger (AFP)
Estimated time: 15–20 minutes • Skill: Beginner This procedure will guide you through the process of removing and replacing the...
Autofocus Switch Replacement – Fusion Maker, Edge, Pro 24 & 36
This procedure outlines the steps required to safely and effectively replace the Autofocus Switch on the Fusion Maker, Edge, and...
Autofocus Switch Replacement – Pro 48 (Large Aperture)
This guide provides step-by-step instructions for replacing the Autofocus Switch in a large aperture Fusion Pro 48 laser system. It...
Backplane Board Replacement
This document provides step-by-step instructions for the removal and installation of the backplane board for Fusion Pro 24 & 36...
Backplane Board Replacement – Fusion Galvo
This document outlines the replacement of the backplane board in the G100....
Backplane Board Replacement – Fusion Pro 32 & 48
This document outlines the replacement of the backplane board in the Fusion Pro 32 and 48....
Backplane Install – Zing
Please find the attachment for an in-depth description....