Usage and Operation Archives

Filter Control – Connection Guide

Wiring diagrams and pinouts for connecting external filtration systems to your Epilog.

Epilog Fusion Maker, Edge, Pro, and Galvo laser systems include a DB9 port on the right side of the control panel for managing external filtration systems. These signals are automatically assigned based on the selected filter type in the Epilog control panel. Currently, Epilog officially supports two filtration systems: Filtrabox (...)

03/16/2026

Silent Installation of Epilog Software Suite

As of version 2.2.16.2, the Epilog Software Suite installer includes support for silent installation, with some important caveats: Silent installation is supported, but this may not operate correctly in a headless mode. During installation, Windows may still prompt the user to confirm whether they trust Epilog as a driver publisher. (...)

03/16/2026

How to Set Up Graphics Software for Epilog Laser Systems

This guide provides step-by-step instructions for configuring and using popular graphic design software with Epilog Laser systems.

Software Setup CorelDRAW Setup Open CorelDRAW. Note: CorelDRAW Graphics Suite is the recommended CorelDraw version for use with Epilog Laser systems. Other versions, such as the Student or Standard version, may have different menu options and settings. Select Tools > Options > Global > Printing > Driver Compatibility. Choose Epilog (...)

03/30/2026

Updating the Firmware

How do I update the Firmware in the Fusion engraver?

In firmware version 1.0.9.0, the update process has been streamlined for efficiency. Systems running 1.0.9.0 or later can update using the methods below. Click the USB / Network tabs to view instructions for each update method. Download the latest firmware file from the Official Drivers and Firmware Page before beginning. (...)

07/28/2026

Driver and Firmware Downloads

Where can I download the latest drivers and firmware for my laser?

You can find the latest versions of Epilog Laser’s driver and firmware software available for download at www.epiloglaser.com/support/drivers/. To stay informed when a new driver version is released, join the Driver Notification mailing list located on that page.

04/01/2025

Updating the Peripherals

How do I update the peripherals in the Fusion Maker, Edge, Pro, and Galvo?

Peripheral updates ensure optimal performance and communication between the engraver’s programmable components by installing the latest firmware and configuration files. Programming the Peripherals On the display panel, tap the gear icon in the upper-right corner to open the Settings menu: Figure 1: Access the Settings menu by tapping the gear (...)

03/31/2026

Job Generator

How do I use the "Generate" feature in the Epilog Software Suite?

The Job Generator is a new feature available in version 2.2.14 of the Epilog Software Suite. It generates a grid of diverse settings and parameters to assist in finding the ideal settings for a specific material. This document will walk you through the setup and basic functionality of this powerful (...)

04/03/2025

220VAC Power Connections: Core End Type and Photo

What type of power cord do I need to run on 220VAC?

Epilog’s laser systems are equipped with auto-switching power supplies that accommodate input voltages ranging from 110 to 240 volts at 50–60Hz. We recommend using a dedicated 15A circuit breaker regardless of the operating voltage to ensure stable and reliable performance. For Systems Operating on 220V in the United States The (...)

05/21/2025

Printing to your Laser from AutoCAD

How do I print to my laser using AutoCAD?

The following article includes general instructions and tips on printing to an Epilog Laser system from AutoCAD Software. AutoCAD is a very powerful software tool that is often used in conjunction with the laser for cutting applications. Like any tool, understanding how it works and its limitations are helpful in (...)

04/01/2025

System Requirements & Setup

Filters

Filters

Updating the Firmware (1.0.8.8 and below)

Sending Vector Jobs from Adobe Illustrator

Interactive Connection Guide

Filter Control – Connection Guide

Silent Installation of Epilog Software Suite

How to Set Up Graphics Software for Epilog Laser Systems

Updating the Firmware

Driver and Firmware Downloads

Updating the Peripherals

Job Generator

220VAC Power Connections: Core End Type and Photo

Printing to your Laser from AutoCAD