Service and Repair Archives

Draining The Filter Regulator Module

Learn how to safely drain and inspect the main air filter on Fusion Pro increased aperture laser systems to maintain airflow and prevent contamination.

Moisture and debris naturally accumulate inside the filter regulator module during machine operation. Regular draining helps maintain proper airflow and protects downstream pneumatic components. Safety First: Disconnect the main air supply and fully depressurize the pneumatic system before servicing the filter assembly. Drain Procedure Step 1 Locate the Filter Assembly (...)

06/10/2026

Laser System Preventative Maintenance

Updated March 2026 | Frequency may vary based on material usage and throughput. To ensure peak performance and extend the lifespan of your laser system, follow this structured maintenance schedule. Bi-Weekly High Frequency Clean Optics: Inspect and clean mirrors and lenses. Clean Crumb Tray: Remove debris to prevent flare-ups. Monthly (...)

03/16/2026

Cleaning and Greasing the Linear Guide (IKO)

This guide provides detailed instructions for cleaning and greasing the linear guide rail on your Epilog Laser system. Over time, debris and buildup can affect motion smoothness and engraving accuracy. Performing regular maintenance helps ensure optimal performance and extends the life of your equipment. Follow each step carefully, and refer (...)

12/30/2025

Optics Cleaning – Fusion Maker, Edge, and Pro

This document details how to properly clean the Fusion Maker, Edge, and Pro carriage optics.

Daily Maintenance Cleaning Remove the lens and carriage mirror. Safely detach both the lens and carriage mirror using the video guide below. Figure 1. Lens and carriage mirror removal process. Carriage Optics Removal Steps Disconnect the air tubing from the lens. Loosen the thumb screws on the carriage cover and (...)

12/31/2025

Cleaning Procedures – Fusion Maker, Edge, and Pro

This document details the general cleaning and maintenance of the Fusion Maker, Edge, and Pro machine.

Regular cleaning of the Fusion Pro engraver will result in a longer service life of the engraver and less down time. Additionally, regular cleaning of the Fusion Pro engraver can mitigate the risk of flare-ups and other thermal events. A mild household cleaner or degreaser can be used to clean (...)

12/31/2025

Pro 32, Pro 48

Cleaning Your Optics

Cleaning the Optics on the Fusion Pro 32 & 48 Laser System

Cleaning the Lens Tube Optics To begin the procedure of cleaning your optics, with the machine powered on, select the Jog icon. Then use the joystick to move the laser head toward the front and middle of the machine to provide you easier access to the lens assembly. (...)

12/31/2025

Pro 24, Pro 36

Cleaning Your Optics

Cleaning your lens and mirrors is an essential part of routine maintenance.

Cleaning the Focusing Lens Optics The mirrors in the periscope housing are enclosed, and will likely require cleaning less often than the other components of the optics system. Let’s start by jogging the laser assembly toward the front of the machine for access to the optics, then we’ll turn off (...)

12/31/2025

Cleaning

Filters

Filters

Draining The Filter Regulator Module

Laser System Preventative Maintenance

Cleaning and Greasing the Linear Guide (IKO)

Optics Cleaning – Fusion Maker, Edge, and Pro

Cleaning Procedures – Fusion Maker, Edge, and Pro

Cleaning Your Optics

Cleaning Your Optics