X-Axis Idler Install – Fusion / Fusion M2
Please find the attachment for an in-depth description.
Table Motor Install – Fusion / Fusion M2
Please find the attachment for an in-depth description.
X-Axis Belt Install – Fusion / Fusion M2
This guide outlines the step-by-step process for replacing the X-axis belt on your laser machine. Before beginning, ensure the machine is powered off and properly prepared for service. Each section includes detailed instructions and corresponding images to help you complete the procedure safely and efficiently. Please follow all notes and (...)
Lens Install – Fusion / Fusion M2
Please find the attachment for an in-depth description.
Y-Axis Slider Block Install – FiberMark
Please find the attachment for an in-depth description.
Table Motor Install – FiberMark
Please find the attachment for an in-depth description.
Repairing Y-Axis Movement: Replacing the Y-Motor
Estimated time: 15–20 minutes • Skill: Basic This guide explains how to replace the Y-motor on the Epilog FiberMark laser system. The Y-motor drives the X-Axis assembly forward and backward. Following these instructions will help you safely remove the old motor and install the new one. Procedure Disconnect the machine (...)
X-Axis Motor Install – FiberMark
Estimated time: 15–20 minutes • Skill: Basic This guide explains how to replace the X-motor on the Epilog FiberMark laser system. The X-motor is responsible for moving the lens carriage from left to right along the X-axis. Following these instructions will help you safely remove the old motor and install (...)
Laser Installation – FiberMark
Please find the attachment for an in-depth description.
X-Axis Assembly Install – FiberMark
Estimated time: 30–45 minutes • Skill: Intermediate This guide explains how to remove and reinstall the X-Axis assembly on the Epilog FiberMark laser engraver. Removing the X-Axis rail is necessary for tasks such as replacing the X-Axis belt or servicing the bearing guard on the underside of the rail. You’ll (...)
Interlock Install – FiberMark
Please find the attachment for an in-depth description.
Full Guide: Removing the X-Axis Rail and Belt
Estimated time: 30–45 minutes • Skill: Intermediate To replace the X-Axis belt on an Epilog FiberMark laser, you must remove the X-Axis rail to allow access to the bearing guard and proper belt routing. This procedure involves three phases: removing the rail, replacing the belt, and reinstalling the rail and (...)