Introduction
Maximum diameter that will fit on the Rotary Attachment for each system
- Epilog Zing 24: 5.25″ (133mm)
- Epilog Mini 18: 3″ (76mm)
- Epilog Mini 24: 5″ (127mm)
- Epilog Helix: 8″ (203mm)
- Fusion 32: 10.75″ (273 mm)
- Fusion 40: 10.75″ (273 mm)
- Fusion M2 32: 10.25″ (260 mm)
- Fusion M2 40: 10.25″ (260 mm)
- Fusion Pro 32: 9.25″ (234 mm)
- Fusion Pro 48: 9.25″ (234 mm)
- Fusion Pro 24: 6″ (152 mm)
- Fusion Pro 36: 6″ (152 mm)
- Fusion Edge 12: 4″ (101 mm)
- Fusion Edge 24: 7″ (177 mm)
- Fusion Edge 36: 7″ (177 mm)
- Fusion Maker 12: 4″ (101 mm)
- Fusion Maker 24: 4″ (101 mm)
- Fusion Maker 36: 7″ (177 mm)
- Fusion G100: 6″ (152 mm)
FiberMark Maximum Rotary Attachment Diameter
Standard Rotary
- 1.5″ Lens: 4.25″ (109 mm)
- 3″ Lens: 2.75″ (70 mm)
- 5″ Lens: 1.0″ (26 mm)
3- Jaw / Clamp Rotary
- 1.5″ Lens: 3.25″ (83 mm)
- 3″ Lens: 1.75″ (44 mm)
- 5″ Lens: n/a
The maximum length of object that can be used in the 3-Jaw Chuck Rotary Attachment is as follows:
- 3-jaw chuck: 470mm
- All other fixtures: 500mm
- Total length of 3-jaw chuck rotary: 66cm
