Fusion Ascent Laser Machines

Control Board – SD Card – Coin Battery – Backplane Board

Learn how to replace the control board, sd card, and backplane board on the Fusion Ascent.

Safety First: Ensure the laser system is completely powered off and the main power cord is unplugged from the wall outlet before touching or disconnecting any internal electronics. Do not touch any exposed power supply components. Important: The control board, backplane, and other electronic components are sensitive to electrostatic discharge (...)

07/31/2026

X-Axis Rail Replacement

Learn how to safely remove and replace the X-Axis rail on a Fusion Ascent laser system.

06/25/2026

Technical Overview

This video provides a high-level overview of the Fusion Ascent, including its key components, unique features, and important operating considerations.

06/25/2026

Control Board Airflow Optimization

Estimated Time: 5-10 Minutes • Skill Level: Beginner To ensure your Ascent laser maintains peak performance and sustained reliability during heavy workloads, this guide outlines a simple, proactive airflow optimization. By permanently removing the control board fan filter, your system will achieve maximum cooling efficiency for uninterrupted operation during demanding (...)

05/26/2026

Air Assist Solenoid Replacement

This guide provides step-by-step technical instructions for replacing the air assist solenoid assembly on your Ascent laser system. Safety First: Ensure the laser system is completely powered off and the main power cord is unplugged from the wall outlet before touching or disconnecting any internal electronics. Do not touch any (...)

05/26/2026

Air Assist Solenoid Configuration Update

This guide provides troubleshooting steps if your Ascent laser’s air assist solenoid is not energizing properly and is failing to deliver airflow to the laser carriage. Phase 1: Test Solenoid Function Before taking anything apart, verify whether the solenoid is working correctly. You will also use this exact process to (...)

05/26/2026

Sending Your First Job to the laser

How to Send Your First Job to the Laser.

Choose Your Design Software Epilog’s laser systems work through the Epilog Laser Software Suite, built on an open architecture design, so you can create your artwork files in any graphic design software packages, including CorelDRAW, Illustrator, Photoshop, AutoCAD, and many more. Choose the software that you’re most comfortable with so (...)

10/01/2026

Initial Setup

Configure your system settings before you start using your new Epilog.

Step 1: Turn on Your Machine Begin by turning on your laser system use the key found in your startup kit. Place it in the keyhole at the top of the machine and turn it to power on the machine. If the machine does not turn on, make sure the (...)

05/14/2026

Fusion Ascent

Filters

Filters

LightBurn Connection Guide

Cleaning the Overhead and Carriage Cameras

Top Door Replacement

Intermittent Missing Letters from CorelDRAW Print Output

Control Board – SD Card – Coin Battery – Backplane Board

X-Axis Rail Replacement

Technical Overview

Control Board Airflow Optimization

Air Assist Solenoid Replacement

Air Assist Solenoid Configuration Update

Sending Your First Job to the laser

Initial Setup