Fusion Galvo Laser Machine

Camera Board Replacement – G100

How do I replace the overhead cameras in my G100?

This guide provides step-by-step instructions for removing and replacing the overhead camera assembly in the G100 laser system. Follow all instructions carefully and ensure power is disconnected before performing any maintenance. Camera Removal Turn off the machine. Disconnect the machine from power. Loosen and remove the top screws. Remove the (...)

06/05/2025

How to Set Up Graphics Software for Epilog Laser Systems

This guide provides step-by-step instructions for configuring and using popular graphic design software with Epilog Laser systems.

Software Setup CorelDRAW Setup Open CorelDRAW. Note: CorelDRAW Graphics Suite is the recommended CorelDraw version for use with Epilog Laser systems. Other versions, such as the Student or Standard version, may have different menu options and settings. Select Tools > Options > Global > Printing > Driver Compatibility. Choose Epilog (...)

03/30/2026

Rotary Circuit Board Replacement – Fusion Galvo G100

Replacing the rotary circuit board on the Fusion Galvo G100 laser is a critical maintenance procedure designed to restore or maintain optimal rotary function. This guide provides step-by-step instructions for safely accessing, removing, and installing the rotary circuit board. Proper handling and installation are essential to ensure continued precision and (...)

09/25/2025

My Artwork isn’t showing up in the Epilog Dashboard

My Artwork Isn’t Showing Up in the Epilog Dashboard and the Run Time Says 0:00?

Explanation of the Symptoms When encountering this issue, you may see something similar to the image below—here we can see the artwork in the preview thumbnail, but the artwork does not appear in the work area: However, if zoomed out, we can see that the artwork did transfer to the (...)

04/25/2025

Generating Machine Logs

How do I generate the machine logs?

Generating machine logs enables Epilog Technical Support to gather important information about the machine, aiding in its diagnosis and troubleshooting. The process is straightforward and requires either a USB flash drive or a network-connected machine. This guide will outline the steps for generating logs. Logs can be generated one of (...)

07/10/2026

Manipulating Clip Art to Create Unique Designs

How can I change a piece of clipart so it will engrave well?

One of the most common challenges we hear from customers has absolutely nothing to do with lasers. Instead, we hear a lot of laser operators looking for unique and creative artwork they can use to create samples or custom projects for customers. If your customer doesn’t supply you with a (...)

04/07/2025

Focus Lens 101

How does the focus lens work on the laser?

This Technical Library article discusses the purpose of the focus lens as well as guidelines for using lenses of different sizes for various projects. What does a focus lens do? A laser beam emanating from the laser tube is typically around one-quarter of an inch (240 thousandths) in diameter. This (...)

12/31/2025

Fusion Galvo

Filters

Filters

Silent Installation of Epilog Software Suite

Cycles vs Copies vs Passes

Custom Home Position / Center – Engraving

How and When To Use the Copy Background Image Feature

Naming Your Laser Engraving Files

Camera Board Replacement – G100

How to Set Up Graphics Software for Epilog Laser Systems

Rotary Circuit Board Replacement – Fusion Galvo G100

My Artwork isn’t showing up in the Epilog Dashboard

Generating Machine Logs

Manipulating Clip Art to Create Unique Designs

Focus Lens 101