Service and Repair Archives

X-Axis Motor Fan Replacement – Legend 36EXT

How do I replace the X-Axis motor fan in my Legend 36EXT

This document provides detailed instructions for installing the X-motor fan on the Epilog Legend EXT laser system. Proper cooling is essential for reliable motor performance, and this procedure ensures the fan is securely mounted and correctly connected. Before beginning, make sure the engraver is powered off and disconnected from its (...)

04/11/2025

RF Unit Replacement – Legend 36EXT

How do I replace the RF unit in my Legend 36EXT?

This document outlines the step-by-step procedure for replacing the RF (radio frequency) unit in the Epilog Legend EXT laser system. The RF unit is a vital component of the laser’s operation, and proper replacement is necessary to ensure consistent performance and reliability. Before beginning, power off the machine and disconnect (...)

04/11/2025

X-Axis Motor Replacement – Legend 36EXT

This document details the X-Axis motor installation on a Legend 36EXT.

This document provides step-by-step instructions for replacing the X-axis motor in the Epilog Legend 36EXT laser system. The X motor plays a critical role in ensuring accurate movement of the laser carriage, and proper installation is essential for maintaining optimal engraving performance. Before beginning this procedure, ensure the machine is (...)

04/11/2025

Laser Replacement – Legend 36EXT

This article explains how to replace the CO2 laser tube in a Legend 36EXT.

This document provides step-by-step instructions for replacing the laser tube in the Epilog Legend EXT laser system. To ensure safety and prevent electrical hazards, disconnect the machine from its power source before beginning this procedure. Proper handling during removal and installation is essential to avoid damage to components. For alignment (...)

04/11/2025

Laser Troubleshooting Guide: Replacing the Safety Interlocks

How do I replace the safety interlocks on the Legend 36EXT.

Estimated time: 15–20 minutes • Skill: Beginner This guide outlines the procedure for replacing the window and door interlocks on an Epilog Legend 36 EXT laser system. These safety interlocks are designed to prevent the laser from firing when access panels are open. If they are damaged or not functioning (...)

10/16/2025

Autofocus Plunger Replacement – Legend 36EXT

This document provides detailed instructions on replacing the autofocus sensor in a legend 36 EXT

This document outlines the step-by-step procedure for replacing the Auto Focus sensor on the Epilog Legend EXT laser system. Before beginning, make sure the machine is powered off to ensure safety during the process. Familiarity with the X-carriage assembly is recommended; refer to the exploded view diagram for part identification (...)

04/11/2025

Power Supply Replacement – Legend 36EXT

This document details how to replace the power supply in a legend 36 EXT.

This document provides detailed instructions for replacing the power supply in the Epilog EXT laser system. To ensure safety and prevent electrical shock or equipment damage, always disconnect the power cord from the machine before beginning the procedure. Follow each step carefully to remove the existing power supply and install (...)

04/11/2025

Quick Guide: Replacing the Control Board

How to replace the control board on a Legend 36 EXT.

Estimated time: 20–30 minutes • Skill: Intermediate This procedure will guide you through the process of removing and replacing the main controller board in a Legend EXT laser system. Following these steps ensures safe handling of sensitive electronics, proper reconnection, and minimal downtime after installation. Important: Always wear the included (...)

10/14/2025

X-Axis Flex Cable Install – 36EXT

How do I install the X-Axis flex cable on my 36EXT?

The X-axis flex cable plays a crucial role in the operation of the Epilog Legend 36EXT engraver. Over time, the cable may wear out or become damaged, requiring replacement. This guide provides step-by-step instructions to safely replace the X-axis flex cable, ensuring that your engraver continues to perform at its (...)

04/08/2025

Laser Alignment – Legend 36EXT

How do I align the laser in my 36EXT?

Please find the attachment for an in-depth description.

12/31/2025

Encoder Reader Installation

How do I install the encoder reader on my 36EXT?

This procedure outlines the steps necessary to replace the X-axis encoder reader on the Legend EXT machine. The X-axis encoder reader is a crucial component for accurate movement tracking of the lens carriage assembly. Over time, this part may need maintenance or replacement to ensure continued precision and smooth operation (...)

04/08/2025

Encoder Strip Install

How do I install the encoder strip in my 36EXT?

The attached document will guide you through replacing the encoder strip on a 36EXT.

09/24/2024

Service and Repair

Filters

Filters

X-Axis Motor Fan Replacement – Legend 36EXT

RF Unit Replacement – Legend 36EXT

X-Axis Motor Replacement – Legend 36EXT

Laser Replacement – Legend 36EXT

Laser Troubleshooting Guide: Replacing the Safety Interlocks

Autofocus Plunger Replacement – Legend 36EXT

Power Supply Replacement – Legend 36EXT

Quick Guide: Replacing the Control Board

X-Axis Flex Cable Install – 36EXT

Laser Alignment – Legend 36EXT

Encoder Reader Installation

Encoder Strip Install