Ga naar de hoofdinhoud

Inhoudsopgave

IRIS™ Camera Positioning System

The Fusion Ascent includes the IRIS™ Camera Positioning System which allows you to accurately place your artwork on screen in seconds. The overhead camera(s) provide a live picture of the working area for accurate artwork placement, and a camera at the lens allows the system to find preprinted registration marks.

Your machine will either have 1 or 2 overhead cameras, depending on your machine’s model.

IRIS Camera Positioning System

Using the IRIS™ Camera

The live preview of your projects can be viewed within the Epilog Dashboard under the Preview tab. The IRIS™ Camera Positioning System will provide the most accurate results when:

  • The piece being cut or engraved is placed directly underneath the camera(s), and
  • The table level is focused to the piece. If the piece is not in focus on the table, the artwork may not be aligned properly in the live preview on the Dashboard.

The camera(s) may also be calibrated for improved accuracy. For more information, see “APPENDIX C: SYSTEM CALIBRATION”.

Helpful Note:

The top door of the machine must be completely shut to use the live preview in the Epilog Dashboard.