Fusion Edge Laser Machines

IRIS Camera Calibration Guide

How do I calibrate the IRIS camera system in the Maker, Edge, Pro, and Ascent?

Estimated Time: 20–40 Minutes • Skill Level: Intermediate Important: All focus calibration procedures must be completed before performing a camera calibration to ensure accurate results. Click the tabs below to switch between machine types. Each tab shows the camera calibration procedure specific to that machine. Overview & Requirements Fusion Edge (...)

04/15/2026

Job Generator

How do I use the "Generate" feature in the Epilog Software Suite?

The Job Generator is a new feature available in version 2.2.14 of the Epilog Software Suite. It generates a grid of diverse settings and parameters to assist in finding the ideal settings for a specific material. This document will walk you through the setup and basic functionality of this powerful (...)

04/03/2025

Quick Guide: Calibrating the Joystick for Accurate Movement

Calibrating the joystick can resolve issues like delayed movement, inaccurate control, or the carriage drifting on its own while in jog mode.

Steps to Calibrate the Joystick Open the Settings Menu On the display panel, press the gear icon in the top-right corner to open the Settings menu. Image 1: Home screen with gear icon in top-right corner Access Advanced Settings Press and hold the word “Settings” on the screen until the (...)

03/16/2026

Driver and Firmware Downloads

Where can I download the latest drivers and firmware for my laser?

You can find the latest versions of Epilog Laser’s driver and firmware software available for download at www.epiloglaser.com/support/drivers/. To stay informed when a new driver version is released, join the Driver Notification mailing list located on that page.

04/01/2025

Welcome

Welcome to the Epilog Laser Training Suite!

09/26/2024

Unpacking the Laser

Unbox your new Fusion Edge and get started!

Open the Packaging Begin by moving the pallet and machine into the center of a room or open space. Start by using scissors or a utility knife to cut the box straps. Stand clear of the straps, as they are under high tension and may pop out at high speed (...)

09/26/2024

Epilog Laser System Initial Setup

Configure your system settings before you start using your new Epilog.

Step 1: Turn on Your Machine Begin by turning on your laser system. The power switch is located on the side near the back of the machine for all models: Fusion Maker, Edge, Pro, and Galvo. For the Fusion Pro 48 and Fusion Galvo G100, there’s an additional key to (...)

05/14/2026

Sending Your First Job to the Laser

How to Send Your First Job to the Laser.

Choose Your Design Software Epilog’s laser systems work through the Epilog Laser Software Suite, built on an open-architecture design so you can create your artwork files in many different graphic software packages, including CorelDraw, Illustrator, Photoshop, AutoCAD, and many more.Choose the software that you’re most comfortable with, so you don’t (...)

05/14/2026

How to Permanently Save Jobs on Your Laser Engraver

Learn to save the jobs you use most often, directly on the laser itself.

How to Save a Job at the Laser Saving a job to your laser is quick and easy. This lets any operator access and run a popular job, even if they are not familiar with the file. After sending a job to the laser, you can see it in the (...)

04/01/2026

Image Resolution and How it Affects Engraving

Discover how changing your DPI will give you different engraving results.

1200 DPI resolution is used for projects that need the best engraving quality. It is ideal for very small fonts or when deep engraving is important. How do you know which DPI setting is right for your project? Print quality is often determined by the resolution of an image, and (...)

04/01/2026

Bitmap (Raster) vs Vector Graphics for Engraving

Learn the difference between printing raster and vector files.

Raster Images Let’s begin by talking about raster images. A raster image is an arrangement of cells, called pixels, which form an image when displayed on screen. This deer image is an excellent example of a raster image. It looks like a highly detailed picture, but is actually made up (...)

04/01/2026

Control Panel Tour – Fusion Lasers (Pro, Edge, Maker, Galvo)

Learn all about your machine's touchscreen interface.

The control panel consists of a 7 inch LCD display, a joystick, and a Go/Stop button for starting and stopping your jobs at the machine. Once you’ve powered on the machine, you will notice several icons on the display. At the top of the screen you will see button icons (...)

04/01/2026

Fusion Edge

Filters

Filters

IRIS Camera Calibration Guide

Job Generator

Quick Guide: Calibrating the Joystick for Accurate Movement

Driver and Firmware Downloads

Welcome

Unpacking the Laser

Epilog Laser System Initial Setup

Sending Your First Job to the Laser

How to Permanently Save Jobs on Your Laser Engraver

Image Resolution and How it Affects Engraving

Bitmap (Raster) vs Vector Graphics for Engraving

Control Panel Tour – Fusion Lasers (Pro, Edge, Maker, Galvo)