Table des matières
- Introduction
- Sécurité
- Pour commencer
- Setting Up Your Laser System
- Unpacking the Fusion Ascent
- Choose Where to Locate the System
- Connecting the Exhaust
- Connecting Electrical Power
- Connecting the Laser to Your Computer
- Power on the Laser
- Set the IP Address
- Install the Software Suite & Set Up Your Laser
- Sign Up for Driver Updates and Register Your System
- Panneau de configuration
- System Features
- Machine Maintenance
- Specifications
- Technical Support
- Warranty
- Paramètres matériels
- Calibration
Menu Paramètres
The Settings menu has 8 sub-menus.
Accueil
This menu allows you to set an offset to the Home position.
Tutorial
This menu allows you to set up your machine. It is the same process as when you set up your laser for the first time, including a demo job to test the machine.
Focus
This menu includes options to calibrate the table, CO2 or fiber focus, or the plunger.
Laser
This menu allows you to fine-tune your laser’s settings.
Backup
This option allows you to backup and restore the machine’s factory settings.
Network
This menu allows you to set up your machine’s network settings via Ethernet, Wifi or USB.
Alignement
This menu is used for aligning the laser of the machine.
Program
This menu is used for updating the peripherals of the machine.
