Table of Contents
- Introduction
- Safety
- Getting Started
- Setting Up Your Laser System
- Unpacking the Fusion Ascent
- Choose Where to Locate the System
- Connecting the Exhaust
- Connecting Electrical Power
- Connecting the Laser to Your Computer
- Power on the Laser
- Set the IP Address
- Install the Software Suite & Set Up Your Laser
- Sign Up for Driver Updates and Register Your System
- Control Panel
- System Features
- Machine Maintenance
- Specifications
- Technical Support
- Warranty
- Material Settings
- Calibration
Electrical Safety
Warning
The AC input power to the Epilog Model 19000 Laser System is potentially lethal and is fully contained within the cabinet.
- DO NOT open any of the machine’s access panels while the unit is plugged in. Opening a panel may expose the operator to the unit’s AC input power.
- DO NOT make or break any electrical connections to the system while the unit is turned on.
Fusion Ascent Electrical Specifications
| Model | Wattage(s) | Voltage | Amp draw – MAX |
|---|---|---|---|
| Ascent 12 | 30, 40, 60 | 115-240 | 12A |
| Ascent 12 | 30, 40, 60 | 220-240 | 6.4A |
| Ascent 24/36 | 40, 60, 80 | 115-240 | 12A |
| Ascent 24/36 | 40, 60, 80 | 220-240 | 6.4A |